地理位置数据显示在我的模拟器上的应用程序中,但不在我的物理设备上

如何解决地理位置数据显示在我的模拟器上的应用程序中,但不在我的物理设备上

我的应用程序包含一个我现在用作虚拟对象的活动。单击按钮时,屏幕上会显示经度和纬度等地理位置。它在模拟器上运行良好,但在设备上运行不正常。我尝试在设备上打开和关闭位置查找器,但没有任何反应。当我卸载并重新安装它时,请求获得我的位置的权限,但就是这样,什么也没有显示。

这是在 onCreate 方法中:

locationRequest = LocationRequest.create();
    locationRequest.setPriority(LocationRequest.PRIORITY_HIGH_ACCURACY);
    locationRequest.setInterval(5000);
    locationRequest.setFastestInterval(1000);

    LocationSettingsRequest.Builder builder = new LocationSettingsRequest.Builder();
    builder.addLocationRequest(locationRequest);
    LocationSettingsRequest locationSettingsRequest = builder.build();

    locationCallback = new LocationCallback() {
        @Override
        public void onLocationResult(@NonNull LocationResult locationResult) {
            super.onLocationResult(locationResult);
            if (locationResult == null){
                Log.println(Log.VERBOSE,"LocationResult","NULL");
            }else {
                for(Location location : locationResult.getLocations()){
                    if (location == null){
                        Log.println(Log.VERBOSE,"NULL");
                    }else{
                        Log.println(Log.VERBOSE,"found location: "+location.getLatitude()+","+location.getLongitude());
                        //Initialize geocoder
                        Geocoder geocoder = new Geocoder(get_location.this,Locale.getDefault());
                        //Initialize address list
                        try {
                            List<Address> addresses = geocoder.getFromLocation(location.getLatitude(),location.getLongitude(),1);
                            textView_gps_loc.setText("Latitude: " + addresses.get(0).getLatitude()
                                    + "\nLongitude: " + addresses.get(0).getLongitude()
                                    + "\nCountry: " + addresses.get(0).getCountryName()
                                    + "\nLocality: " + addresses.get(0).getLocality()
                                    + "\nAddress Line" + addresses.get(0).getAddressLine(0));
                        } catch (IOException e) {
                            e.printStackTrace();
                        }
                    }
                }
            }
        }
    };

然后外面是这样的:

private void getLocation() {
    Log.println(Log.VERBOSE,"Location","getting location");

    if (ActivityCompat.checkSelfPermission(this,Manifest.permission.ACCESS_FINE_LOCATION) != PackageManager.PERMISSION_GRANTED) {
        // TODO: Consider calling
        //    ActivityCompat#requestPermissions
        // here to request the missing permissions,and then overriding
        //   public void onRequestPermissionsResult(int requestCode,String[] permissions,//                                          int[] grantResults)
        // to handle the case where the user grants the permission. See the documentation
        // for ActivityCompat#requestPermissions for more details.
        // Should we show an explanation?
        if (ActivityCompat.shouldShowRequestPermissionRationale(get_location.this,Manifest.permission.ACCESS_FINE_LOCATION)) {

            // Show an explanation to the user *asynchronously* -- don't block
            // this thread waiting for the user's response! After the user
            // sees the explanation,try again to request the permission.
            new AlertDialog.Builder(get_location.this)
                    .setTitle(R.string.title_location_permission)
                    .setMessage(R.string.text_location_permission)
                    .setPositiveButton(R.string.ok,new DialogInterface.OnClickListener() {
                        @Override
                        public void onClick(DialogInterface dialogInterface,int i) {
                            //Prompt the user once explanation has been shown
                            ActivityCompat.requestPermissions(get_location.this,new String[]{Manifest.permission.ACCESS_FINE_LOCATION},MY_PERMISSIONS_REQUEST_LOCATION);
                        }
                    })
                    .create()
                    .show();


        } else {
            // No explanation needed,we can request the permission.
            ActivityCompat.requestPermissions(get_location.this,MY_PERMISSIONS_REQUEST_LOCATION);
        }
        return;
    }
    else {
        fusedLocationProviderClient.getLastLocation().addOnCompleteListener(new OnCompleteListener<Location>() {
            @Override
            public void onComplete(@NonNull Task<Location> task) {
                //Initialize Location
                Location location = task.getResult();
                if (location != null) {
                    //Initialize geocoder
                    Geocoder geocoder = new Geocoder(get_location.this,Locale.getDefault());
                    //Initialize address list
                    try {
                        List<Address> addresses = geocoder.getFromLocation(location.getLatitude(),1);
                        textView_gps_loc.setText("Latitude: " + addresses.get(0).getLatitude()
                                + "\nLongitude: " + addresses.get(0).getLongitude()
                                + "\nCountry: " + addresses.get(0).getCountryName()
                                + "\nLocality: " + addresses.get(0).getLocality()
                                + "\nAddress Line" + addresses.get(0).getAddressLine(0));
                    } catch (IOException e) {
                        e.printStackTrace();
                    }
                }
            }
        });
        fusedLocationProviderClient.requestLocationUpdates(locationRequest,locationCallback,null);
    }
}

我的可穿戴设备支持 GPS,所以我不知道是什么问题

版权声明:本文内容由互联网用户自发贡献,该文观点与技术仅代表作者本人。本站仅提供信息存储空间服务,不拥有所有权,不承担相关法律责任。如发现本站有涉嫌侵权/违法违规的内容, 请发送邮件至 dio@foxmail.com 举报,一经查实,本站将立刻删除。

相关推荐


使用本地python环境可以成功执行 import pandas as pd import matplotlib.pyplot as plt # 设置字体 plt.rcParams[&#39;font.sans-serif&#39;] = [&#39;SimHei&#39;] # 能正确显示负号 p
错误1:Request method ‘DELETE‘ not supported 错误还原:controller层有一个接口,访问该接口时报错:Request method ‘DELETE‘ not supported 错误原因:没有接收到前端传入的参数,修改为如下 参考 错误2:cannot r
错误1:启动docker镜像时报错:Error response from daemon: driver failed programming external connectivity on endpoint quirky_allen 解决方法:重启docker -&gt; systemctl r
错误1:private field ‘xxx‘ is never assigned 按Altʾnter快捷键,选择第2项 参考:https://blog.csdn.net/shi_hong_fei_hei/article/details/88814070 错误2:启动时报错,不能找到主启动类 #
报错如下,通过源不能下载,最后警告pip需升级版本 Requirement already satisfied: pip in c:\users\ychen\appdata\local\programs\python\python310\lib\site-packages (22.0.4) Coll
错误1:maven打包报错 错误还原:使用maven打包项目时报错如下 [ERROR] Failed to execute goal org.apache.maven.plugins:maven-resources-plugin:3.2.0:resources (default-resources)
错误1:服务调用时报错 服务消费者模块assess通过openFeign调用服务提供者模块hires 如下为服务提供者模块hires的控制层接口 @RestController @RequestMapping(&quot;/hires&quot;) public class FeignControl
错误1:运行项目后报如下错误 解决方案 报错2:Failed to execute goal org.apache.maven.plugins:maven-compiler-plugin:3.8.1:compile (default-compile) on project sb 解决方案:在pom.
参考 错误原因 过滤器或拦截器在生效时,redisTemplate还没有注入 解决方案:在注入容器时就生效 @Component //项目运行时就注入Spring容器 public class RedisBean { @Resource private RedisTemplate&lt;String
使用vite构建项目报错 C:\Users\ychen\work&gt;npm init @vitejs/app @vitejs/create-app is deprecated, use npm init vite instead C:\Users\ychen\AppData\Local\npm-
参考1 参考2 解决方案 # 点击安装源 协议选择 http:// 路径填写 mirrors.aliyun.com/centos/8.3.2011/BaseOS/x86_64/os URL类型 软件库URL 其他路径 # 版本 7 mirrors.aliyun.com/centos/7/os/x86
报错1 [root@slave1 data_mocker]# kafka-console-consumer.sh --bootstrap-server slave1:9092 --topic topic_db [2023-12-19 18:31:12,770] WARN [Consumer clie
错误1 # 重写数据 hive (edu)&gt; insert overwrite table dwd_trade_cart_add_inc &gt; select data.id, &gt; data.user_id, &gt; data.course_id, &gt; date_format(
错误1 hive (edu)&gt; insert into huanhuan values(1,&#39;haoge&#39;); Query ID = root_20240110071417_fe1517ad-3607-41f4-bdcf-d00b98ac443e Total jobs = 1
报错1:执行到如下就不执行了,没有显示Successfully registered new MBean. [root@slave1 bin]# /usr/local/software/flume-1.9.0/bin/flume-ng agent -n a1 -c /usr/local/softwa
虚拟及没有启动任何服务器查看jps会显示jps,如果没有显示任何东西 [root@slave2 ~]# jps 9647 Jps 解决方案 # 进入/tmp查看 [root@slave1 dfs]# cd /tmp [root@slave1 tmp]# ll 总用量 48 drwxr-xr-x. 2
报错1 hive&gt; show databases; OK Failed with exception java.io.IOException:java.lang.RuntimeException: Error in configuring object Time taken: 0.474 se
报错1 [root@localhost ~]# vim -bash: vim: 未找到命令 安装vim yum -y install vim* # 查看是否安装成功 [root@hadoop01 hadoop]# rpm -qa |grep vim vim-X11-7.4.629-8.el7_9.x
修改hadoop配置 vi /usr/local/software/hadoop-2.9.2/etc/hadoop/yarn-site.xml # 添加如下 &lt;configuration&gt; &lt;property&gt; &lt;name&gt;yarn.nodemanager.res