如何解决在 Cisco 第 3 层交换机上配置 VLAN 监控
我看不到来自我的客户端的任何流量,只监控 ospf 更新:
sudo tcpdump -i ens20
tcpdump: verbose output suppressed,use -v or -vv for full protocol decode
listening on ens20,link-type EN10MB (Ethernet),capture size 262144 bytes
09:31:02.329509 IP 192.168.202.1 > ospf-all.mcast.net: OSPFv2,Hello,length 56
09:31:11.875678 IP 192.168.202.1 > ospf-all.mcast.net: OSPFv2,length 56
09:31:21.599345 IP 192.168.202.1 > ospf-all.mcast.net: OSPFv2,length 56
我的设置:
interface GigabitEthernet1/1
no switchport
ip address 192.168.200.1 255.255.255.0
!
!
# the client is connected here
interface GigabitEthernet1/4
switchport access vlan 2
switchport mode access
!
# this is the monitoring port connected to a host running tcp dump
interface GigabitEthernet1/5
no switchport
no ip address
!
...
interface Vlan1
no ip address
shutdown
!
interface Vlan2
ip address 192.168.202.1 255.255.255.0
!
我尝试了以下显示器配置:
!
monitor session 1 source interface Gi1/4
monitor session 1 destination interface Gi1/5
!
monitor session 1 source vlan 2
monitor session 1 destination interface Gi1/5
都只显示 ospf 和 arp 请求。我使用的是 4010 第 3 层交换机。
版权声明:本文内容由互联网用户自发贡献,该文观点与技术仅代表作者本人。本站仅提供信息存储空间服务,不拥有所有权,不承担相关法律责任。如发现本站有涉嫌侵权/违法违规的内容, 请发送邮件至 dio@foxmail.com 举报,一经查实,本站将立刻删除。