我的服务器通过eth0(50.131.xxx.xxx)连接到公共互联网.
同一台服务器通过eth1连接到LAN(192.168.138.1/24上为192.168.138.1)
在同一台服务器上,我运行了libvirt,它创建了另一个子网192.168.122.0/24.目前唯一的客人是192.168.122.10.
同一台服务器通过eth1连接到LAN(192.168.138.1/24上为192.168.138.1)
在同一台服务器上,我运行了libvirt,它创建了另一个子网192.168.122.0/24.目前唯一的客人是192.168.122.10.
我正试图在服务器上设置路由,而且我被卡住了.
从我在局域网上的笔记本电脑(192.168.138.18),我可以进入客户,服务器和公共互联网.但是,我只能部分地做相反的事情：从我的客人,我可以ssh到服务器,但我不能ssh到笔记本电脑,或到达公共互联网.
这是服务器上的Ubuntu 12.04 LTS,以及来宾的13.04.
在客人：
guest> traceroute serverfault.com 1 192.168.122.1 (192.168.122.1) 0.644 ms 0.577 ms 0.564 ms 2 * * *
(等等)
这里有一些数据可以帮助比我更有知识的人.
guest> ip r default via 192.168.122.1 dev eth0 192.168.122.0/24 dev eth0 proto kernel scope link src 192.168.122.10 server> cat /proc/sys/net/ipv4/ip_forward 1 server> ifconfig eth0 Link encap:Ethernet HWaddr 6c:f0:49:0e:09:b2 inet addr:50.131.xxx.xxx Bcast:255.255.255.255 Mask:255.255.252.0 UP broADCAST RUNNING MULTICAST MTU:576 Metric:1 RX packets:670219 errors:0 dropped:0 overruns:0 frame:0 TX packets:532895 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:271653035 (271.6 MB) TX bytes:70403086 (70.4 MB) Interrupt:41 eth1 Link encap:Ethernet HWaddr 00:c0:49:fa:1f:da inet addr:192.168.138.1 Bcast:192.168.138.255 Mask:255.255.255.0 UP broADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:539044 errors:0 dropped:0 overruns:0 frame:0 TX packets:563204 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:72237497 (72.2 MB) TX bytes:272391132 (272.3 MB) Interrupt:19 Base address:0x2000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:14143 errors:0 dropped:0 overruns:0 frame:0 TX packets:14143 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:8000728 (8.0 MB) TX bytes:8000728 (8.0 MB) virbr0 Link encap:Ethernet HWaddr 52:54:00:9e:51:10 inet addr:192.168.122.1 Bcast:192.168.122.255 Mask:255.255.255.0 UP broADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1655 errors:0 dropped:0 overruns:0 frame:0 TX packets:2067 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:188811 (188.8 KB) TX bytes:242584 (242.5 KB) vnet0 Link encap:Ethernet HWaddr fe:54:00:cf:1f:41 UP broADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1655 errors:0 dropped:0 overruns:0 frame:0 TX packets:4105 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:211981 (211.9 KB) TX bytes:348362 (348.3 KB) server> brctl show bridge name bridge id STP enabled interfaces virbr0 8000.5254009e5110 yes virbr0-nic vnet0 server> ip route default via 50.131.xxx.1 dev eth0 metric 100 50.131.xxx.0/22 dev eth0 proto kernel scope link src 50.131.xxx.xxx 192.168.122.0/24 dev virbr0 proto kernel scope link src 192.168.122.1 192.168.138.0/24 dev eth1 proto kernel scope link src 192.168.138.1 server> virsh net-list Name State Autostart ----------------------------------------- default active yes server> virsh net-edit default <network> <name>default</name> <uuid>ddc855bf-8794-f4de-f1f9-7480edf9f419</uuid> <forward mode='route'/> <bridge name='virbr0' stp='on' delay='20' /> <mac address='52:54:00:9E:51:10'/> <ip address='192.168.122.1' netmask='255.255.255.0'> <dhcp> <range start='192.168.122.100' end='192.168.122.254' /> <host mac='52:54:00:cf:1f:41' name='guest.example.com' ip='192.168.122.10' /> </dhcp> </ip> </network> server> tail /etc/sysctl.conf ... net.bridge.bridge-nf-call-ip6tables = 0 net.bridge.bridge-nf-call-iptables = 0 net.bridge.bridge-nf-call-arptables = 0
我也跑了ufw.它说：
server> ufw status verbose Status: active Logging: on (low) Default: deny (incoming),allow (outgoing) New profiles: skip To Action From -- ------ ---- OpenSSH ALLOW Anywhere 53/tcp ALLOW 192.168.138.0/24 53/udp ALLOW 192.168.138.0/24 21 ALLOW 192.168.138.0/24 192.168.138.0/24 ALLOW 192.168.138.0/24 192.168.122.0/24 ALLOW 192.168.138.0/24 192.168.138.0/24 ALLOW 192.168.122.0/24 192.168.122.0/24 ALLOW 192.168.122.0/24
对我来说,这听起来像是非常明显的事情,但是,对我来说,似乎……
– 添加：
即使我禁用了ufw,行为也是一样的.但这是iptables-save的输出：
# Generated by iptables-save v1.4.12 on Mon Jul 29 08:57:10 2013 *mangle :PREROUTING ACCEPT [4511095:1341076448] :INPUT ACCEPT [79374:20510726] :FORWARD ACCEPT [4428917:1318506209] :OUTPUT ACCEPT [72504:23698077] :POSTROUTING ACCEPT [4501421:1342204286] -A POSTROUTING -o virbr0 -p udp -m udp --dport 68 -j CHECKSUM --checksum-fill COMMIT # Completed on Mon Jul 29 08:57:10 2013 # Generated by iptables-save v1.4.12 on Mon Jul 29 08:57:10 2013 *nat :PREROUTING ACCEPT [33012:2764507] :INPUT ACCEPT [16436:1476129] :OUTPUT ACCEPT [10423:864202] :POSTROUTING ACCEPT [10487:868042] -A POSTROUTING -s 192.168.138.0/24 -o eth0 -j MASQUERADE -A POSTROUTING -s 192.168.138.0/24 -o eth0 -j MASQUERADE COMMIT # Completed on Mon Jul 29 08:57:10 2013 # Generated by iptables-save v1.4.12 on Mon Jul 29 08:57:10 2013 *filter :INPUT DROP [1335:71456] :FORWARD ACCEPT [3360867:988924571] :OUTPUT ACCEPT [18:936] :ufw-after-forward - [0:0] :ufw-after-input - [0:0] :ufw-after-logging-forward - [0:0] :ufw-after-logging-input - [0:0] :ufw-after-logging-output - [0:0] :ufw-after-output - [0:0] :ufw-before-forward - [0:0] :ufw-before-input - [0:0] :ufw-before-logging-forward - [0:0] :ufw-before-logging-input - [0:0] :ufw-before-logging-output - [0:0] :ufw-before-output - [0:0] :ufw-logging-allow - [0:0] :ufw-logging-deny - [0:0] :ufw-not-local - [0:0] :ufw-reject-forward - [0:0] :ufw-reject-input - [0:0] :ufw-reject-output - [0:0] :ufw-skip-to-policy-forward - [0:0] :ufw-skip-to-policy-input - [0:0] :ufw-skip-to-policy-output - [0:0] :ufw-track-input - [0:0] :ufw-track-output - [0:0] :ufw-user-forward - [0:0] :ufw-user-input - [0:0] :ufw-user-limit - [0:0] :ufw-user-limit-accept - [0:0] :ufw-user-logging-forward - [0:0] :ufw-user-logging-input - [0:0] :ufw-user-logging-output - [0:0] :ufw-user-output - [0:0] -A INPUT -i virbr0 -p udp -m udp --dport 53 -j ACCEPT -A INPUT -i virbr0 -p tcp -m tcp --dport 53 -j ACCEPT -A INPUT -i virbr0 -p udp -m udp --dport 67 -j ACCEPT -A INPUT -i virbr0 -p tcp -m tcp --dport 67 -j ACCEPT -A INPUT -j ufw-before-logging-input -A INPUT -j ufw-before-input -A INPUT -j ufw-after-input -A INPUT -j ufw-after-logging-input -A INPUT -j ufw-reject-input -A INPUT -j ufw-track-input -A FORWARD -d 192.168.122.0/24 -o virbr0 -j ACCEPT -A FORWARD -s 192.168.122.0/24 -i virbr0 -j ACCEPT -A FORWARD -i virbr0 -o virbr0 -j ACCEPT -A FORWARD -o virbr0 -j REJECT --reject-with icmp-port-unreachable -A FORWARD -i virbr0 -j REJECT --reject-with icmp-port-unreachable -A FORWARD -j ufw-before-logging-forward -A FORWARD -j ufw-before-forward -A FORWARD -j ufw-after-forward -A FORWARD -j ufw-after-logging-forward -A FORWARD -j ufw-reject-forward -A OUTPUT -j ufw-before-logging-output -A OUTPUT -j ufw-before-output -A OUTPUT -j ufw-after-output -A OUTPUT -j ufw-after-logging-output -A OUTPUT -j ufw-reject-output -A OUTPUT -j ufw-track-output -A ufw-after-input -p udp -m udp --dport 137 -j ufw-skip-to-policy-input -A ufw-after-input -p udp -m udp --dport 138 -j ufw-skip-to-policy-input -A ufw-after-input -p tcp -m tcp --dport 139 -j ufw-skip-to-policy-input -A ufw-after-input -p tcp -m tcp --dport 445 -j ufw-skip-to-policy-input -A ufw-after-input -p udp -m udp --dport 67 -j ufw-skip-to-policy-input -A ufw-after-input -p udp -m udp --dport 68 -j ufw-skip-to-policy-input -A ufw-after-input -m addrtype --dst-type broADCAST -j ufw-skip-to-policy-input -A ufw-after-logging-input -m limit --limit 3/min --limit-burst 10 -j LOG --log-prefix "[UFW BLOCK] " -A ufw-before-forward -j ufw-user-forward -A ufw-before-input -i lo -j ACCEPT -A ufw-before-input -m state --state RELATED,ESTABLISHED -j ACCEPT -A ufw-before-input -m state --state INVALID -j ufw-logging-deny -A ufw-before-input -m state --state INVALID -j DROP -A ufw-before-input -p icmp -m icmp --icmp-type 3 -j ACCEPT -A ufw-before-input -p icmp -m icmp --icmp-type 4 -j ACCEPT -A ufw-before-input -p icmp -m icmp --icmp-type 11 -j ACCEPT -A ufw-before-input -p icmp -m icmp --icmp-type 12 -j ACCEPT -A ufw-before-input -p icmp -m icmp --icmp-type 8 -j ACCEPT -A ufw-before-input -p udp -m udp --sport 67 --dport 68 -j ACCEPT -A ufw-before-input -j ufw-not-local -A ufw-before-input -d 224.0.0.251/32 -p udp -m udp --dport 5353 -j ACCEPT -A ufw-before-input -d 239.255.255.250/32 -p udp -m udp --dport 1900 -j ACCEPT -A ufw-before-input -j ufw-user-input -A ufw-before-output -o lo -j ACCEPT -A ufw-before-output -m state --state RELATED,ESTABLISHED -j ACCEPT -A ufw-before-output -j ufw-user-output -A ufw-logging-allow -m limit --limit 3/min --limit-burst 10 -j LOG --log-prefix "[UFW ALLOW] " -A ufw-logging-deny -m state --state INVALID -m limit --limit 3/min --limit-burst 10 -j RETURN -A ufw-logging-deny -m limit --limit 3/min --limit-burst 10 -j LOG --log-prefix "[UFW BLOCK] " -A ufw-not-local -m addrtype --dst-type LOCAL -j RETURN -A ufw-not-local -m addrtype --dst-type MULTICAST -j RETURN -A ufw-not-local -m addrtype --dst-type broADCAST -j RETURN -A ufw-not-local -m limit --limit 3/min --limit-burst 10 -j ufw-logging-deny -A ufw-not-local -j DROP -A ufw-skip-to-policy-forward -j ACCEPT -A ufw-skip-to-policy-input -j DROP -A ufw-skip-to-policy-output -j ACCEPT -A ufw-track-output -p tcp -m state --state NEW -j ACCEPT -A ufw-track-output -p udp -m state --state NEW -j ACCEPT -A ufw-user-input -p tcp -m tcp --dport 22 -m comment --comment "\'dapp_OpenSSH\'" -j ACCEPT -A ufw-user-input -s 192.168.138.0/24 -p tcp -m tcp --dport 53 -j ACCEPT -A ufw-user-input -s 192.168.138.0/24 -p udp -m udp --dport 53 -j ACCEPT -A ufw-user-input -s 192.168.138.0/24 -p tcp -m tcp --dport 21 -j ACCEPT -A ufw-user-input -s 192.168.138.0/24 -p udp -m udp --dport 21 -j ACCEPT -A ufw-user-input -s 192.168.138.0/24 -d 192.168.138.0/24 -j ACCEPT -A ufw-user-input -s 192.168.138.0/24 -d 192.168.122.0/24 -j ACCEPT -A ufw-user-input -s 192.168.122.0/24 -d 192.168.138.0/24 -j ACCEPT -A ufw-user-input -s 192.168.122.0/24 -d 192.168.122.0/24 -j ACCEPT -A ufw-user-limit -m limit --limit 3/min -j LOG --log-prefix "[UFW LIMIT BLOCK] " -A ufw-user-limit -j REJECT --reject-with icmp-port-unreachable -A ufw-user-limit-accept -j ACCEPT COMMIT # Completed on Mon Jul 29 08:57:10 2013
解决方法
版权声明：本文内容由互联网用户自发贡献，该文观点与技术仅代表作者本人。本站仅提供信息存储空间服务，不拥有所有权，不承担相关法律责任。如发现本站有涉嫌侵权/违法违规的内容， 请发送邮件至 dio@foxmail.com 举报，一经查实，本站将立刻删除。
