当我尝试使用mkfs.ext3格式化/ dev / drbd0时,我收到错误消息：
mkfs.ext3: Wrong medium type while trying to determine filesystem
size.
但是,如果我执行sueggested命令drbdadm primary test,我收到以下错误：
0: State change Failed: (-1) Multiple primaries not allowed by config
Command ‘drbdsetup 0 primary’ terminated with exit code 11
有任何想法吗 ？
Command cat / proc / drbd的输出：
version: 8.3.7 (api:88/proto:86-91)
srcversion: EE47D8BF18AC166BE219757
0: cs:Connected ro:Secondary/Primary ds:UpToDate/UpToDate C r----
ns:0 nr:0 dw:0 dr:0 al:0 bm:0 lo:0 pe:0 ua:0 ap:0 ep:1 wo:b oos:0
和
drbd.conf：
# You can find an example in /usr/share/doc/drbd.../drbd.conf.example
#include "drbd.d/global_common.conf";
#include "drbd.d/*.res";
global {
usage-count yes;
}
common {
syncer {
rate 100M;
}
}
resource test {
protocol C;
handlers {
pri-on-incon-degr "echo o > /proc/sysrq-trigger ; halt -f";
pri-lost-after-sb "echo o > /proc/sysrq-trigger ; halt -f";
local-io-error "echo o > /proc/sysrq-trigger ; halt -f";
# outdate-peer "/usr/sbin/drbd-peer-outdater";
}
startup {
wfc-timeout 0; ## Infinite!
degr-wfc-timeout 120; ## 2 minutes.
}
disk {
on-io-error detach;
}
net {
# timeout 60;
# connect-int 10;
# ping-int 10;
# max-buffers 2048;
# max-epoch-size 2048;
# on-disconnect-reconnect;
after-sb-0pri discard-younger-primary;
after-sb-1pri consensus;
after-sb-2pri disconnect;
rr-conflict disconnect;
# allow-two-primaries;
}
syncer {
rate 100M;
al-extents 257;
}
on VOXDEMOSRV01 {
device /dev/drbd0;
disk /dev/sda6;
address 192.168.1.134:7788;
Meta-disk /dev/sda7[0];
}
on VOXDEMOSRVOWN01 {
device /dev/drbd0;
disk /dev/sda2;
address 192.168.1.146:7788;
Meta-disk /dev/sda5[0];
解决方法
版权声明：本文内容由互联网用户自发贡献，该文观点与技术仅代表作者本人。本站仅提供信息存储空间服务，不拥有所有权，不承担相关法律责任。如发现本站有涉嫌侵权/违法违规的内容， 请发送邮件至 dio@foxmail.com 举报，一经查实，本站将立刻删除。
