我有运行Raspbian的RPi B通过HDMI连接到我的LG电视.我成功编译并安装了cec-client,我可以使用命令echo“on 0”|轻松打开电视cec-client -s,但当我尝试使用命令echo“standby 0”|关闭电视时cec-client -s我得到这个输出：
opening a connection to the CEC adapter...
DEBUG: [ 316] unregistering all CEC clients
DEBUG: [ 318] broadcast (F): osd name set to 'broadcast'
DEBUG: [ 324] InitHostCEC - vchiq_initialise succeeded
DEBUG: [ 325] InitHostCEC - vchi_initialise succeeded
DEBUG: [ 326] InitHostCEC - vchi_connect succeeded
DEBUG: [ 330] logical address changed to broadcast (f)
DEBUG: [ 333] RegisterLogicalAddress - registering address e
DEBUG: [ 605] logical address changed to Recorder 1 (1)
DEBUG: [ 605] logical address changed to Free use (e)
DEBUG: [ 605] Open - vc_cec initialised
NOTICE: [ 605] connection opened
DEBUG: [ 607] processor thread started
DEBUG: [ 608] << broadcast (F) -> TV (0): POLL
DEBUG: [ 611] initiator 'broadcast' is not supported by the CEC adapter. using 'Free use' instead
TRAFFIC: [ 612] << e0
DEBUG: [ 647] >> POLL sent
DEBUG: [ 647] TV (0): device status changed into 'present'
DEBUG: [ 647] << requesting vendor ID of 'TV' (0)
TRAFFIC: [ 647] << e0:8c
DEBUG: [ 1858] expected response not received (87: device vendor id)
TRAFFIC: [ 1859] << e0:8c
DEBUG: [ 3070] expected response not received (87: device vendor id)
NOTICE: [ 3070] registering new CEC client - v2.1.4
DEBUG: [ 3070] detecting logical address for type 'recording device'
DEBUG: [ 3070] trying logical address 'Recorder 1'
DEBUG: [ 3070] << Recorder 1 (1) -> Recorder 1 (1): POLL
TRAFFIC: [ 3071] << 11
DEBUG: [ 3071] UnregisterLogicalAddress - releasing prevIoUs logical address
DEBUG: [ 3072] logical address changed to broadcast (f)
DEBUG: [ 3073] RegisterLogicalAddress - registering address 1
DEBUG: [ 3255] logical address changed to Free use (e)
DEBUG: [ 3255] logical address changed to Recorder 1 (1)
TRAFFIC: [ 3255] << 11
DEBUG: [ 3255] >> POLL not sent
DEBUG: [ 3256] using logical address 'Recorder 1'
DEBUG: [ 3256] Recorder 1 (1): device status changed into 'handled by libCEC'
DEBUG: [ 3256] Recorder 1 (1): power status changed from 'unkNown' to 'on'
DEBUG: [ 3256] Recorder 1 (1): vendor = pulse Eight (001582)
DEBUG: [ 3256] Recorder 1 (1): CEC version 1.4
DEBUG: [ 3256] AllocateLogicalAddresses - device '0',type 'recording device',LA '1'
DEBUG: [ 3256] Recorder 1 (1): osd name set to 'CECTester'
DEBUG: [ 3256] Recorder 1 (1): menu language set to 'eng'
DEBUG: [ 3258] GetPhysicalAddress - physical address = 3000
DEBUG: [ 3258] AutodetectPhysicalAddress - autodetected physical address '3000'
DEBUG: [ 3260] Recorder 1 (1): physical address changed from ffff to 3000
DEBUG: [ 3262] << Recorder 1 (1) -> broadcast (F): physical adddress 3000
TRAFFIC: [ 3263] << 1f:84:30:00:01
NOTICE: [ 3415] CEC client registered: libCEC version = 2.1.4,client version = 2.1.4,firmware version = 1,logical address(es) = Recorder 1 (1),physical address: 3.0.0.0,host: armv6l-unkNown-linux-gnueabihf,features: 'P8 USB' 'P8 USB detect' 'RPi',git revision: a560d24,compiled on: Sun Sep 14 17:49:41 UTC 2014 by pi@raspBerrypi on Linux 3.12.28+ (armv6l)
DEBUG: [ 3415] << Recorder 1 (1) -> TV (0): OSD name 'CECTester'
TRAFFIC: [ 3415] << 10:47:43:45:43:54:65:73:74:65:72
DEBUG: [ 3716] << requesting power status of 'TV' (0)
TRAFFIC: [ 3716] << 10:8f
TRAFFIC: [ 3868] >> 01:8c
DEBUG: [ 3868] >> TV (0) -> Recorder 1 (1): give device vendor id (8C)
DEBUG: [ 3871] << Recorder 1 (1) -> TV (0): vendor id pulse Eight (1582)
TRAFFIC: [ 3873] << 1f:87:00:15:82
TRAFFIC: [ 4087] >> 01:90:00
DEBUG: [ 4087] >> TV (0) -> Recorder 1 (1): report power status (90)
DEBUG: [ 4088] TV (0): power status changed from 'unkNown' to 'on'
DEBUG: [ 4089] expected response received (90: report power status)
DEBUG: [ 4091] << requesting vendor ID of 'TV' (0)
TRAFFIC: [ 4091] << 10:8c
TRAFFIC: [ 4323] >> 0f:87:00:e0:91
DEBUG: [ 4323] >> TV (0) -> broadcast (F): device vendor id (87)
DEBUG: [ 4323] TV (0): vendor = LG (00e091)
DEBUG: [ 4323] << Recorder 1 (1) -> broadcast (F): vendor id pulse Eight (1582)
TRAFFIC: [ 4323] << 1f:87:00:15:82
DEBUG: [ 4474] expected response received (87: device vendor id)
DEBUG: [ 4475] replacing the command handler for device 'TV' (0)
DEBUG: [ 4478] TV (0): CEC version 1.3a
DEBUG: [ 4479] TV (0): menu language set to 'eng'
DEBUG: [ 4481] Recorder 1 (1): vendor = LG (00e091)
DEBUG: [ 4485] replacing the command handler for device 'Recorder 1' (1)
DEBUG: [ 4485] Recorder 1 (1): CEC version 1.3a
NOTICE: [ 4487] << putting 'TV' (0) in standby mode
TRAFFIC: [ 4488] << 10:36
DEBUG: [ 4552] unregistering all CEC clients
NOTICE: [ 4555] unregistering client: libCEC version = 2.1.4,compiled on: Sun Sep 14 17:49:41 UTC 2014 by pi@raspBerrypi on Linux 3.12.28+ (armv6l)
DEBUG: [ 4559] Recorder 1 (1): power status changed from 'on' to 'unkNown'
DEBUG: [ 4561] Recorder 1 (1): vendor = UnkNown (000000)
DEBUG: [ 4564] Recorder 1 (1): CEC version unkNown
DEBUG: [ 4565] Recorder 1 (1): osd name set to 'Recorder 1'
DEBUG: [ 4567] Recorder 1 (1): device status changed into 'unkNown'
DEBUG: [ 4567] unregistering all CEC clients
DEBUG: [ 4624] UnregisterLogicalAddress - releasing prevIoUs logical address
DEBUG: [ 4630] logical address changed to broadcast (f)
没有任何反应.此外,我只使用CLI,并在一段时间后RPi将电视放入空白屏幕保护程序,但我无法弄清楚如何在我的命令下立即执行此操作.
最佳答案
似乎libCEC没有任何问题.然而,LG TV模型的HDMI-CEC实现可能只是忽略了备用命令.您应该使用其他符合HDMI-CEC标准的设备测试RaspBerry Pi,以检查备用命令是否正常工作.
原文地址：https://www.jb51.cc/linux/441086.html
版权声明：本文内容由互联网用户自发贡献，该文观点与技术仅代表作者本人。本站仅提供信息存储空间服务，不拥有所有权，不承担相关法律责任。如发现本站有涉嫌侵权/违法违规的内容， 请发送邮件至 dio@foxmail.com 举报，一经查实，本站将立刻删除。
