我检查了我的httpd.conf文件,没有发现任何东西,让我知道我需要看的其他区域.
虽然我的其他链接工作正常 –
http：// localhost / PHPmyadmin /或http：// localhost / myprojects /
这是我在我的httpd.conf文件中 –
DocumentRoot "C:/xampp/htdocs" # # Each directory to which Apache has access can be configured with respect # to which services and features are allowed and/or disabled in that # directory (and its subdirectories). # # First,we configure the "default" to be a very restrictive set of # features. # <Directory /> Options FollowSymLinks AllowOverride All Order deny,allow Deny from all </Directory>
最后 – 是的,我问了很多,但在我的情况下找不到任何东西.
Apache正在工作 –
我的hhtpd.conf文件 –
# # This is the main Apache HTTP server configuration file. It contains the # configuration directives that give the server its instructions. # See <URL:http://httpd.apache.org/docs/2.2> for detailed information. # In particular,see # <URL:http://httpd.apache.org/docs/2.2/mod/directives.html> # for a discussion of each configuration directive. # # Do NOT simply read the instructions in here without understanding # what they do. They're here only as hints or reminders. If you are unsure # consult the online docs. You have been warned. # # Configuration and logfile names: If the filenames you specify for many # of the server's control files begin with "/" (or "drive:/" for Win32),the # server will use that explicit path. If the filenames do *not* begin # with "/",the value of ServerRoot is prepended -- so "logs/foo.log" # with ServerRoot set to "C:/xampp/apache" will be interpreted by the # server as "C:/xampp/apache/logs/foo.log". # # NOTE: Where filenames are specified,you must use forward slashes # instead of backslashes (e.g.,"c:/apache" instead of "c:\apache"). # If a drive letter is omitted,the drive on which httpd.exe is located # will be used by default. It is recommended that you always supply # an explicit drive letter in absolute paths to avoid confusion. # # ServerRoot: The top of the directory tree under which the server's # configuration,error,and log files are kept. # # Do not add a slash at the end of the directory path. If you point # ServerRoot at a non-local disk,be sure to point the LockFile directive # at a local disk. If you wish to share the same ServerRoot for multiple # httpd daemons,you will need to change at least LockFile and PidFile. # ServerRoot "C:/xampp/apache" # # Listen: Allows you to bind Apache to specific IP addresses and/or # ports,instead of the default. See also the <VirtualHost> # directive. # # Change this to Listen on specific IP addresses as shown below to # prevent Apache from glomming onto all bound IP addresses. # #Listen 0.0.0.0:80 #Listen [::]:80 Listen 80 # # Dynamic Shared Object (DSO) Support # # To be able to use the functionality of a module which was built as a DSO you # have to place corresponding `LoadModule' lines at this location so the # directives contained in it are actually available _before_ they are used. # Statically compiled modules (those listed by `httpd -l') do not need # to be loaded here. # # Example: # LoadModule foo_module modules/mod_foo.so # LoadModule actions_module modules/mod_actions.so LoadModule alias_module modules/mod_alias.so LoadModule asis_module modules/mod_asis.so LoadModule auth_basic_module modules/mod_auth_basic.so LoadModule auth_digest_module modules/mod_auth_digest.so #LoadModule authn_alias_module modules/mod_authn_alias.so #LoadModule authn_anon_module modules/mod_authn_anon.so #LoadModule authn_dbd_module modules/mod_authn_dbd.so #LoadModule authn_dbm_module modules/mod_authn_dbm.so LoadModule authn_default_module modules/mod_authn_default.so LoadModule authn_file_module modules/mod_authn_file.so #LoadModule authnz_ldap_module modules/mod_authnz_ldap.so #LoadModule authz_dbm_module modules/mod_authz_dbm.so LoadModule authz_default_module modules/mod_authz_default.so LoadModule authz_groupfile_module modules/mod_authz_groupfile.so LoadModule authz_host_module modules/mod_authz_host.so #LoadModule authz_owner_module modules/mod_authz_owner.so LoadModule authz_user_module modules/mod_authz_user.so LoadModule autoindex_module modules/mod_autoindex.so #LoadModule bucketeer_module modules/mod_bucketeer.so #LoadModule cache_module modules/mod_cache.so #LoadModule case_filter_module modules/mod_case_filter.so #LoadModule case_filter_in_module modules/mod_case_filter_in.so #LoadModule cern_Meta_module modules/mod_cern_Meta.so LoadModule cgi_module modules/mod_cgi.so #LoadModule charset_lite_module modules/mod_charset_lite.so #LoadModule dav_module modules/mod_dav.so #LoadModule dav_fs_module modules/mod_dav_fs.so LoadModule dav_lock_module modules/mod_dav_lock.so #LoadModule dbd_module modules/mod_dbd.so #LoadModule deflate_module modules/mod_deflate.so LoadModule dir_module modules/mod_dir.so #LoadModule disk_cache_module modules/mod_disk_cache.so #LoadModule dumpio_module modules/mod_dumpio.so #LoadModule echo_module modules/mod_echo.so LoadModule env_module modules/mod_env.so #LoadModule example_module modules/mod_example.so #LoadModule expires_module modules/mod_expires.so #LoadModule ext_filter_module modules/mod_ext_filter.so #LoadModule file_cache_module modules/mod_file_cache.so #LoadModule filter_module modules/mod_filter.so LoadModule headers_module modules/mod_headers.so #LoadModule ident_module modules/mod_ident.so #LoadModule imagemap_module modules/mod_imagemap.so LoadModule include_module modules/mod_include.so LoadModule info_module modules/mod_info.so LoadModule isapi_module modules/mod_isapi.so #LoadModule ldap_module modules/mod_ldap.so #LoadModule logio_module modules/mod_logio.so LoadModule log_config_module modules/mod_log_config.so #LoadModule log_forensic_module modules/mod_log_forensic.so #LoadModule mem_cache_module modules/mod_mem_cache.so LoadModule mime_module modules/mod_mime.so #LoadModule mime_magic_module modules/mod_mime_magic.so LoadModule negotiation_module modules/mod_negotiation.so LoadModule proxy_module modules/mod_proxy.so LoadModule proxy_ajp_module modules/mod_proxy_ajp.so #LoadModule proxy_balancer_module modules/mod_proxy_balancer.so #LoadModule proxy_connect_module modules/mod_proxy_connect.so #LoadModule proxy_ftp_module modules/mod_proxy_ftp.so #LoadModule proxy_http_module modules/mod_proxy_http.so LoadModule rewrite_module modules/mod_rewrite.so LoadModule setenvif_module modules/mod_setenvif.so #LoadModule speling_module modules/mod_speling.so LoadModule ssl_module modules/mod_ssl.so LoadModule status_module modules/mod_status.so #LoadModule substitute_module modules/mod_substitute.so #LoadModule unique_id_module modules/mod_unique_id.so #LoadModule userdir_module modules/mod_userdir.so #LoadModule usertrack_module modules/mod_usertrack.so #LoadModule version_module modules/mod_version.so #LoadModule vhost_alias_module modules/mod_vhost_alias.so <IfModule !mpm_netware_module> <IfModule !mpm_winnt_module> # # If you wish httpd to run as a different user or group,you must run # httpd as root initially and it will switch. # # User/Group: The name (or #number) of the user/group to run httpd as. # It is usually good practice to create a dedicated user and group for # running httpd,as with most system services. # User daemon Group daemon </IfModule> </IfModule> # 'Main' server configuration # # The directives in this section set up the values used by the 'main' # server,which responds to any requests that aren't handled by a # <VirtualHost> deFinition. These values also provide defaults for # any <VirtualHost> containers you may define later in the file. # # All of these directives may appear inside <VirtualHost> containers,# in which case these default settings will be overridden for the # virtual host being defined. # # # ServerAdmin: Your address,where problems with the server should be # e-mailed. This address appears on some server-generated pages,such # as error documents. e.g. admin@your-domain.com # ServerAdmin postmaster@localhost # # ServerName gives the name and port that the server uses to identify itself. # This can often be determined automatically,but we recommend you specify # it explicitly to prevent problems during startup. # # If your host doesn't have a registered DNS name,enter its IP address here. # ServerName localhost:80 # # DocumentRoot: The directory out of which you will serve your # documents. By default,all requests are taken from this directory,but # symbolic links and aliases may be used to point to other locations. # DocumentRoot "C:/xampp/htdocs" # # Each directory to which Apache has access can be configured with respect # to which services and features are allowed and/or disabled in that # directory (and its subdirectories). # # First,allow Deny from all </Directory> # # Note that from this point forward you must specifically allow # particular features to be enabled - so if something's not working as # you might expect,make sure that you have specifically enabled it # below. # # # This should be changed to whatever you set DocumentRoot to. # <Directory "C:/xampp/htdocs"> # # Possible values for the Options directive are "None","All",# or any combination of: # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews # # Note that "MultiViews" must be named *explicitly* --- "Options All" # doesn't give it to you. # # The Options directive is both complicated and important. Please see # http://httpd.apache.org/docs/2.2/mod/core.html#options # for more information. # Options Indexes FollowSymLinks Includes ExecCGI # # AllowOverride controls what directives may be placed in .htaccess files. # It can be "All","None",or any combination of the keywords: # Options FileInfo AuthConfig Limit # AllowOverride All # # Controls who can get stuff from this server. # Order allow,deny Allow from all </Directory> # # DirectoryIndex: sets the file that Apache will serve if a directory # is requested. # <IfModule dir_module> DirectoryIndex index.PHP index.pl index.cgi index.asp index.shtml index.html index.htm \ default.PHP default.pl default.cgi default.asp default.shtml default.html default.htm \ home.PHP home.pl home.cgi home.asp home.shtml home.html home.htm </IfModule> # # The following lines prevent .htaccess and .htpasswd files from being # viewed by Web clients. # <FilesMatch "^\.ht"> Order allow,deny Deny from all Satisfy All </FilesMatch> # # ErrorLog: The location of the error log file. # If you do not specify an ErrorLog directive within a <VirtualHost> # container,error messages relating to that virtual host will be # logged here. If you *do* define an error logfile for a <VirtualHost> # container,that host's errors will be logged there and not here. # ErrorLog "logs/error.log" #ScriptLog "logs/cgi.log" # # LogLevel: Control the number of messages logged to the error_log. # Possible values include: debug,info,notice,warn,crit,# alert,emerg. # LogLevel warn <IfModule log_config_module> # # The following directives define some format nicknames for use with # a CustomLog directive (see below). # LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t \"%r\" %>s %b" common <IfModule logio_module> # You need to enable mod_logio.c to use %I and %O LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio </IfModule> # # The location and format of the access logfile (Common Logfile Format). # If you do not define any access logfiles within a <VirtualHost> # container,they will be logged here. Contrariwise,if you *do* # define per-<VirtualHost> access logfiles,transactions will be # logged therein and *not* in this file. # #CustomLog "logs/access.log" common # # If you prefer a logfile with access,agent,and referer information # (Combined Logfile Format) you can use the following directive. # CustomLog "logs/access.log" combined </IfModule> <IfModule alias_module> # # Redirect: Allows you to tell clients about documents that used to # exist in your server's namespace,but do not anymore. The client # will make a new request for the document at its new location. # Example: # Redirect permanent /foo http://localhost/bar # # Alias: Maps web paths into filesystem paths and is used to # access content that does not live under the DocumentRoot. # Example: # Alias /webpath /full/filesystem/path # # If you include a trailing / on /webpath then the server will # require it to be present in the URL. You will also likely # need to provide a <Directory> section to allow access to # the filesystem path. # # ScriptAlias: This controls which directories contain server scripts. # ScriptAliases are essentially the same as Aliases,except that # documents in the target directory are treated as applications and # run by the server when requested rather than as documents sent to the # client. The same rules about trailing "/" apply to ScriptAlias # directives as to Alias. # ScriptAlias /cgi-bin/ "C:/xampp/cgi-bin/" </IfModule> <IfModule cgid_module> # # ScriptSock: On threaded servers,designate the path to the UNIX # socket used to communicate with the CGI daemon of mod_cgid. # #Scriptsock "logs/cgi.sock" </IfModule> # # "C:/xampp/cgi-bin" should be changed to whatever your ScriptAliased # CGI directory exists,if you have that configured. # <Directory "C:/xampp/cgi-bin"> AllowOverride None Options None Order allow,deny Allow from all </Directory> # # DefaultType: the default MIME type the server will use for a document # if it cannot otherwise determine one,such as from filename extensions. # If your server contains mostly text or HTML documents,"text/plain" is # a good value. If most of your content is binary,such as applications # or images,you may want to use "application/octet-stream" instead to # keep browsers from trying to display binary files as though they are # text. # DefaultType text/plain <IfModule mime_module> # # TypesConfig points to the file containing the list of mappings from # filename extension to MIME-type. # TypesConfig "conf/mime.types" # # AddType allows you to add to or override the MIME configuration # file specified in TypesConfig for specific file types. # #AddType application/x-gzip .tgz # # AddEncoding allows you to have certain browsers uncompress # information on the fly. Note: Not all browsers support this. # #AddEncoding x-compress .Z #AddEncoding x-gzip .gz .tgz # # If the AddEncoding directives above are commented-out,then you # probably should define those extensions to indicate media types: # AddType application/x-compress .Z AddType application/x-gzip .gz .tgz # # AddHandler allows you to map certain file extensions to "handlers": # actions unrelated to filetype. These can be either built into the server # or added with the Action directive (see below) # # To use CGI scripts outside of ScriptAliased directories: # (You will also need to add "ExecCGI" to the "Options" directive.) # AddHandler cgi-script .cgi .pl .asp # For type maps (negotiated resources): #AddHandler type-map var # # Filters allow you to process content before it is sent to the client. # # To parse .shtml files for server-side includes (SSI): # (You will also need to add "Includes" to the "Options" directive.) # AddType text/html .shtml AddOutputFilter INCLUDES .shtml </IfModule> <IfModule mime_magic_module> # # The mod_mime_magic module allows the server to use varIoUs hints from the # contents of the file itself to determine its type. The MIMEMagicFile # directive tells the module where the hint deFinitions are located. # MIMEMagicFile "conf/magic" </IfModule> # # Customizable error responses come in three flavors: # 1) plain text 2) local redirects 3) external redirects # # Some examples: #ErrorDocument 500 "The server made a boo boo." #ErrorDocument 404 /missing.html #ErrorDocument 404 "/cgi-bin/missing_handler.pl" #ErrorDocument 402 http://localhost/subscription_info.html # # # EnablemmAP and EnableSendfile: On systems that support it,# memory-mapping or the sendfile syscall is used to deliver # files. This usually improves server performance,but must # be turned off when serving from networked-mounted # filesystems or if support for these functions is otherwise # broken on your system. # #EnablemmAP off #EnableSendfile off # Supplemental configuration # # The configuration files in the conf/extra/ directory can be # included to add extra features or to modify the default configuration of # the server,or you may simply copy their contents here and change as # necessary. # XAMPP specific settings Include "conf/extra/httpd-xampp.conf" # Perl settings Include "conf/extra/httpd-perl.conf" # Server-pool management (MPM specific) Include "conf/extra/httpd-mpm.conf" # Multi-language error messages Include "conf/extra/httpd-multilang-errordoc.conf" # Fancy directory listings Include "conf/extra/httpd-autoindex.conf" # Language settings Include "conf/extra/httpd-languages.conf" # User home directories Include "conf/extra/httpd-userdir.conf" # Real-time info on requests and configuration Include "conf/extra/httpd-info.conf" # Virtual hosts Include "conf/extra/httpd-vhosts.conf" # distributed authoring and versioning (WebDAV) # Attention! WEB_DAV is a security risk without a new userspecific configuration for a secure authentifcation # Include "conf/extra/httpd-dav.conf" # Implements a proxy/gateway for Apache. Include "conf/extra/httpd-proxy.conf" # VarIoUs default settings Include "conf/extra/httpd-default.conf" # Secure (SSL/TLS) connections Include "conf/extra/httpd-ssl.conf" # # Note: The following must must be present to support # starting without SSL on platforms with no /dev/random equivalent # but a statically compiled-in mod_ssl. # <IfModule ssl_module> SSLRandomSeed startup builtin SSLRandomSeed connect builtin SSLSessionCache "shmcb:logs/ssl.scache(512000)" SSLSessionCacheTimeout 300 </IfModule> # AJP13 Proxy <IfModule mod_proxy.c> <IfModule mod_proxy_ajp.c> Include "conf/extra/httpd-ajp.conf" </IfModule> </IfModule>
从你的意见来看,好像你可能会在错误的地方看.看看
this question.
也许安装在根目录中的应用程序(您输入http：//localhost/index.PHP时希望看到的应用程序)配置不正确.找到index.PHP文件在根目录下的应用程序,然后查看其配置文件,看看是否可以在某处找到www.localhost.com.一些应用程序将其设置存储在数据库中,这是另一个要查看的地方.
版权声明：本文内容由互联网用户自发贡献，该文观点与技术仅代表作者本人。本站仅提供信息存储空间服务，不拥有所有权，不承担相关法律责任。如发现本站有涉嫌侵权/违法违规的内容， 请发送邮件至 dio@foxmail.com 举报，一经查实，本站将立刻删除。
