最近测试了RedHat 6.5上RHCS，搭建了一个双机HA群集，在此将配置过程和测试过程分享给大家，主要包括节点配置、群集管理服务器配置、群集创建与配置、群集测试等内容。
一、测试环境
计算机名 |
操作系统 |
IP地址 |
群集IP |
安装的软件包 |
HAmanager |
RedHat 6.5 |
192.168.10.150 |
- | luci、iscsi target（用于仲裁盘） |
node1 |
RedHat 6.5 |
192.168.10.104 |
192.168.10.103 |
High Availability、httpd |
node2 |
RedHat 6.5 |
192.168.10.105 |
High Availability、httpd |
二、节点配置
1、在三台机分别配置hosts互相解析
[root@HAmanager ~]# cat /etc/hosts
192.168.10.104 node1 node1.localdomain
192.168.10.105 node2 node2.localdomain
192.168.10.150 HAmanager HAmanager.localdomain
[root@node1 ~]# cat /etc/hosts
192.168.10.104 node1 node1.localdomain
192.168.10.105 node2 node2.localdomain
192.168.10.150 HAmanager HAmanager.localdomain
[root@node2 ~]# cat /etc/hosts
192.168.10.104 node1 node1.localdomain
192.168.10.105 node2 node2.localdomain
192.168.10.150 HAmanager HAmanager.localdomain
2、在三台机分别配置SSH互信
[root@HAmanager ~]# ssh-keygen -t rsa
[root@HAmanager ~]# ssh-copy-id -i node1
[root@node1 ~]# ssh-keygen -t rsa
[root@node1 ~]# ssh-copy-id -i node2
[root@node2 ~]# ssh-keygen -t rsa
[root@node2 ~]# ssh-copy-id -i node1
3、两个节点关闭NetworkManager和acpid服务
[root@node1 ~]# service NetworkManager stop
[root@node1 ~]# chkconfig NetworkManager off
[root@node1 ~]# service acpid stop
[root@node1 ~]# chkconfig acpid off
[root@node2 ~]# service NetworkManager stop
[root@node2 ~]# chkconfig NetworkManager off
[root@node2 ~]# service acpid stop
[root@node2 ~]# chkconfig acpid off
4、两个节点配置本地yum源
[root@node1 ~]# cat/etc/yum.repos.d/rhel6.5.repo
[Server]
name=base
baseurl=file:///mnt/
enabled=1
gpgcheck=0
[HighAvailability]
name=base
baseurl=file:///mnt/HighAvailability
enabled=1
gpgcheck=0
[root@node2 ~]# cat/etc/yum.repos.d/rhel6.5.repo
[Server]
name=base
baseurl=file:///mnt/
enabled=1
gpgcheck=0
[HighAvailability]
name=base
baseurl=file:///mnt/HighAvailability
enabled=1
gpgcheck=0
5、两个节点分别安装群集软件包
[root@node1 ~]# yum groupinstall 'High Availability' –y
Installed:
ccs.x86_64 0:0.16.2-69.el6 cman.x86_640:3.0.12.1-59.el6
omping.x86_64 0:0.0.4-1.el6 rgmanager.x86_640:3.0.12.1-19.el6
Dependency Installed:
cifs-utils.x86_640:4.8.1-19.el6 clusterlib.x86_64 0:3.0.12.1-59.el6
corosync.x86_640:1.4.1-17.el6 corosynclib.x86_64 0:1.4.1-17.el6
cyrus-sasl-md5.x86_640:2.1.23-13.el6_3.1 fence-agents.x86_64 0:3.1.5-35.el6
fence-virt.x86_640:0.2.3-15.el6 gnutls-utils.x86_64 0:2.8.5-10.el6_4.2
ipmitool.x86_64 0:1.8.11-16.el6 keyutils.x86_640:1.4-4.el6
libevent.x86_640:1.4.13-4.el6 libgssglue.x86_64 0:0.1-11.el6
libibverbs.x86_640:1.1.7-1.el6 librdmacm.x86_64 0:1.0.17-1.el6
libtirpc.x86_640:0.2.1-6.el6_4 libvirt-client.x86_64 0:0.10.2-29.el6
lm_sensors-libs.x86_640:3.1.1-17.el6 modcluster.x86_640:0.16.2-28.el6
nc.x86_64 0:1.84-22.el6 net-snmp-libs.x86_64 1:5.5-49.el6
net-snmp-utils.x86_641:5.5-49.el6 nfs-utils.x86_641:1.2.3-39.el6
nfs-utils-lib.x86_640:1.1.5-6.el6 numactl.x86_640:2.0.7-8.el6
oddjob.x86_64 0:0.30-5.el6 openais.x86_64 0:1.1.1-7.el6
openaislib.x86_640:1.1.1-7.el6 perl-Net-Telnet.noarch 0:3.03-11.el6
pexpect.noarch 0:2.3-6.el6 python-suds.noarch0:0.4.1-3.el6
quota.x86_64 1:3.17-20.el6 resource-agents.x86_640:3.9.2-40.el6
ricci.x86_64 0:0.16.2-69.el6 rpcbind.x86_640:0.2.0-11.el6
sg3_utils.x86_64 0:1.28-5.el6 tcp_wrappers.x86_640:7.6-57.el6
telnet.x86_64 1:0.17-47.el6_3.1 yajl.x86_64 0:1.0.7-3.el6
Complete!
[root@node2 ~]# yum groupinstall 'High Availability' –y
Installed:
ccs.x86_64 0:0.16.2-69.el6 cman.x86_640:3.0.12.1-59.el6
omping.x86_64 0:0.0.4-1.el6 rgmanager.x86_640:3.0.12.1-19.el6
Dependency Installed:
cifs-utils.x86_640:4.8.1-19.el6 clusterlib.x86_64 0:3.0.12.1-59.el6
corosync.x86_640:1.4.1-17.el6 corosynclib.x86_64 0:1.4.1-17.el6
cyrus-sasl-md5.x86_640:2.1.23-13.el6_3.1 fence-agents.x86_64 0:3.1.5-35.el6
fence-virt.x86_640:0.2.3-15.el6 gnutls-utils.x86_64 0:2.8.5-10.el6_4.2
ipmitool.x86_64 0:1.8.11-16.el6 keyutils.x86_640:1.4-4.el6
libevent.x86_640:1.4.13-4.el6 libgssglue.x86_64 0:0.1-11.el6
libibverbs.x86_640:1.1.7-1.el6 librdmacm.x86_64 0:1.0.17-1.el6
libtirpc.x86_640:0.2.1-6.el6_4 libvirt-client.x86_64 0:0.10.2-29.el6
lm_sensors-libs.x86_640:3.1.1-17.el6 modcluster.x86_640:0.16.2-28.el6
nc.x86_64 0:1.84-22.el6 net-snmp-libs.x86_64 1:5.5-49.el6
net-snmp-utils.x86_641:5.5-49.el6 nfs-utils.x86_641:1.2.3-39.el6
nfs-utils-lib.x86_640:1.1.5-6.el6 numactl.x86_640:2.0.7-8.el6
oddjob.x86_64 0:0.30-5.el6 openais.x86_64 0:1.1.1-7.el6
openaislib.x86_640:1.1.1-7.el6 perl-Net-Telnet.noarch 0:3.03-11.el6
pexpect.noarch 0:2.3-6.el6 python-suds.noarch0:0.4.1-3.el6
quota.x86_64 1:3.17-20.el6 resource-agents.x86_640:3.9.2-40.el6
ricci.x86_64 0:0.16.2-69.el6 rpcbind.x86_640:0.2.0-11.el6
sg3_utils.x86_64 0:1.28-5.el6 tcp_wrappers.x86_640:7.6-57.el6
telnet.x86_64 1:0.17-47.el6_3.1 yajl.x86_64 0:1.0.7-3.el6
Complete!
6、两个节点分别启动群集服务
[root@node1 ~]# service ricci start
[root@node1 ~]# chkconfig ricci on
[root@node1 ~]# chkconfig cman on
[root@node1 ~]# chkconfig rgmanager on
[root@node2 ~]# service ricci start
[root@node2 ~]# chkconfig ricci on
[root@node2 ~]# chkconfig cman on
[root@node2 ~]# chkconfig rgmanager on
7、两个节点分别配置ricci密码
[root@node1 ~]# passwd ricci
New password:
BAD PASSWORD: it is too short
BAD PASSWORD: is too simple
Retype new password:
passwd: all authentication tokens updated successfully.
[root@node2 ~]# passwd ricci
New password:
BAD PASSWORD: it is too short
BAD PASSWORD: is too simple
Retype new password:
passwd: all authentication tokens updated successfully.
8、两个节点分别安装httpd服务，方便后面测试应用的高可用性
[root@node1 ~]# yum -y install httpd
[root@node1 ~]# echo "This is Node1" > /var/www/html/index.html
[root@node2 ~]# yum -y install httpd
[root@node2 ~]# echo "This is Node2" > /var/www/html/index.html
二、群集管理服务器配置
1、在群集管理服务器安装luci软件包
[root@HAmanager ~]#yum -y install luci
Installed:
luci.x86_64 0:0.26.0-48.el6
Dependency Installed:
turbogears2.noarch 0:2.0.3-4.el6
python-babel.noarch 0:0.9.4-5.1.el6
python-beaker.noarch 0:1.3.1-7.el6
python-cheetah.x86_64 0:2.4.1-1.el6
python-decorator.noarch 0:3.0.1-3.1.el6
python-decoratortools.noarch 0:1.7-4.1.el6
python-formencode.noarch 0:1.2.2-2.1.el6
python-genshi.x86_64 0:0.5.1-7.1.el6
python-mako.noarch 0:0.3.4-1.el6
python-markdown.noarch 0:2.0.1-3.1.el6
python-markupsafe.x86_64 0:0.9.2-4.el6
python-myghty.noarch 0:1.1-11.el6
python-nose.noarch 0:0.10.4-3.1.el6
python-paste.noarch 0:1.7.4-2.el6
python-paste-deploy.noarch 0:1.3.3-2.1.el6
python-paste-script.noarch 0:1.7.3-5.el6_3
python-peak-rules.noarch 0:0.5a1.dev-9.2582.1.el6
python-peak-util-addons.noarch 0:0.6-4.1.el6
python-peak-util-assembler.noarch 0:0.5.1-1.el6
python-peak-util-extremes.noarch 0:1.1-4.1.el6
python-peak-util-symbols.noarch 0:1.0-4.1.el6
python-prioritized-methods.noarch 0:0.2.1-5.1.el6
python-pygments.noarch 0:1.1.1-1.el6
python-pylons.noarch 0:0.9.7-2.el6
python-repoze-tm2.noarch 0:1.0-0.5.a4.el6
python-repoze-what.noarch 0:1.0.8-6.el6
python-repoze-what-pylons.noarch 0:1.0-4.el6
python-repoze-who.noarch 0:1.0.18-1.el6
python-repoze-who-friendlyform.noarch 0:1.0-0.3.b3.el6
python-repoze-who-testutil.noarch 0:1.0-0.4.rc1.el6
python-routes.noarch 0:1.10.3-2.el6
python-setuptools.noarch 0:0.6.10-3.el6
python-sqlalchemy.noarch 0:0.5.5-3.el6_2
python-tempita.noarch 0:0.4-2.el6
python-toscawidgets.noarch 0:0.9.8-1.el6
python-transaction.noarch 0:1.0.1-1.el6
python-turbojson.noarch 0:1.2.1-8.1.el6
python-weberror.noarch 0:0.10.2-2.el6
python-webflash.noarch 0:0.1-0.2.a9.el6
python-webhelpers.noarch 0:0.6.4-4.el6
python-webob.noarch 0:0.9.6.1-3.el6
python-webtest.noarch 0:1.2-2.el6
python-zope-filesystem.x86_64 0:1-5.el6
python-zope-interface.x86_64 0:3.5.2-2.1.el6
python-zope-sqlalchemy.noarch 0:0.4-3.el6
Complete!
[root@HAmanager ~]#
2、启动luci服务
[root@HAmanager ~]# service luci start
Adding following auto-detected host IDs (IP addresses/domain names), corresponding to `HAmanager.localdomain' address, to the configuration of self-managed certificate `/var/lib/luci/etc/cacert.config' (you can change them by editing `/var/lib/luci/etc/cacert.config', removing the generated certificate `/var/lib/luci/certs/host.pem' and restarting luci):
(none suitable found, you can still do it manually as mentioned above)
Generating a 2048 bit RSA private key
writing new private key to '/var/lib/luci/certs/host.pem'
Starting saslauthd: [ OK ]
Start luci...
Point your web browser to https://HAmanager.localdomain:8084 (or equivalent) to access luci
[root@HAmanager ~]# chkconfig luci on
江健龙的技术博客http://jiangjianlong.blog.51cto.com/3735273/1931499
三、创建和配置群集
1、使用浏览器访问HA的web管理界面https://192.168.10.150:8084
2、创建群集并添加节点至群集中
3、添加vCenter为fence设备
4、查找节点的虚拟机UUID
[root@node1 ~]# fence_vmware_soap -a 192.168.10.91 -z -l administrator@vsphere.local -p P@ssw0rd -o list
node1,564df192-7755-9cd6-8a8b-45d6d74eabbb
node2,564df4ed-cda1-6383-bbf5-f99807416184
6、查看fence设备状态
[root@node1 ~]# fence_vmware_soap -a 192.168.10.91 -z -l administrator@vsphere.local -p P@ssw0rd -o status
Status: ON
7、测试fence设备
[root@node2 ~]# fence_check
fence_check run at Tue May 23 09:41:30 CST 2017 pid: 3455
Testing node1.localdomain method 1: success
Testing node2.localdomain method 1: success
8、创建故障域
10、创建群集服务组并添加已有的资源
11、配置仲裁盘，在HAmanager服务器安装iSCSI target服务并创建一块100M的共享磁盘给两个节点
[root@HAmanager ~]#yum install scsi-target-utils -y
[root@HAmanager ~]#dd if=/dev/zero of=/iSCSIdisk/100m.img bs=1M seek=100 count=0
[root@HAmanager ~]#vi /etc/tgt/targets.conf
<target iqn.2016-08.disk.rh7:disk100m>
backing-store /iSCSIdisk/100m.img
initiator-address 192.168.10.104 #for node1
initiator-address 192.168.10.105 #for node2
</target>
[root@HAmanager ~]#service tgtd start
[root@HAmanager ~]#chkconfig tgtd on
[root@HAmanager ~]#tgt-admin –show
Target 1: iqn.2016-08.disk.rh7:disk100m
Driver: iscsi
State: ready
I_T nexus information:
LUN information:
LUN: 0
Type: controller
SCSI ID: IET 00010000
SCSI SN: beaf10
Size: 0 MB, Block size: 1
Online: Yes
Removable media: No
Prevent removal: No
Readonly: No
backing store type: null
backing store path: None
backing store flags:
LUN: 1
Type: disk
SCSI ID: IET 00010001
SCSI SN: beaf11
Size: 105 MB, Block size: 512
Online: Yes
Removable media: No
Prevent removal: No
Readonly: No
backing store type: rdwr
backing store path: /sharedisk/100m.img
backing store flags:
Account information:
ACL information:
192.168.10.104
192.168.10.105
[root@HAmanager ~]#
12、两个节点安装iscsi-initiator-utils并登录iscsi目标
[root@node1 ~]# yum install iscsi-initiator-utils
[root@node1 ~]# chkconfig iscsid on
[root@node1 ~]# iscsiadm -m discovery -t sendtargets -p 192.168.10.150
[root@node1 ~]# iscsiadm -m node
[root@node1 ~]# iscsiadm -m node -T iqn.2016-08.disk.rh7:disk100m --login
[root@node2 ~]# yum install iscsi-initiator-utils
[root@node2 ~]# chkconfig iscsid on
[root@node2 ~]# iscsiadm -m discovery -t sendtargets -p 192.168.10.150
[root@node2 ~]# iscsiadm -m node
[root@node2 ~]# iscsiadm -m node -T iqn.2016-08.disk.rh7:disk100m --login
13、在节点一将共享磁盘/dev/sdb创建分区sdb1
[root@node1 ~]# fdisk /dev/sdb
然后创建成sdb1
[root@node1 ~]# partprobe /dev/sdb1
14、在节点一将sdb1创建成仲裁盘
[root@node1 ~]# mkqdisk -c /dev/sdb1 -l testqdisk
mkqdisk v3.0.12.1
Writing new quorum disk label 'testqdisk' to /dev/sdb1.
WARNING: About to destroy all data on /dev/sdb1; proceed [N/y] ? y
Initializing status block for node 1...
Initializing status block for node 2...
Initializing status block for node 3...
Initializing status block for node 4...
Initializing status block for node 5...
Initializing status block for node 6...
Initializing status block for node 7...
Initializing status block for node 8...
Initializing status block for node 9...
Initializing status block for node 10...
Initializing status block for node 11...
Initializing status block for node 12...
Initializing status block for node 13...
Initializing status block for node 14...
Initializing status block for node 15...
Initializing status block for node 16...
[root@node1 ~]#
[root@node1 ~]# mkqdisk -L
mkqdisk v3.0.12.1
/dev/block/8:17:
/dev/disk/by-id/scsi-1IET_00010001-part1:
/dev/disk/by-path/ip-192.168.10.150:3260-iscsi-iqn.2016-08.disk.rh7:disk100m-lun-1-part1:
/dev/sdb1:
Magic: eb7a62c2
Label: testqdisk
Created: Mon May 22 22:52:01 2017
Host: node1.localdomain
Kernel Sector Size: 512
Recorded Sector Size: 512
[root@node1 ~]#
15、在节点二查看仲裁盘，也正常识别
[root@node2 ~]# partprobe /dev/sdb1
[root@node2 ~]# mkqdisk -L
mkqdisk v3.0.12.1
/dev/block/8:17:
/dev/disk/by-id/scsi-1IET_00010001-part1:
/dev/disk/by-path/ip-192.168.10.150:3260-iscsi-iqn.2016-08.disk.rh7:disk100m-lun-1-part1:
/dev/sdb1:
Magic: eb7a62c2
Label: testqdisk
Created: Mon May 22 22:52:01 2017
Host: node1.localdomain
Kernel Sector Size: 512
Recorded Sector Size: 512
16、配置群集使用该仲裁盘
17、重启群集，使仲裁盘生效
[root@node1 ~]# ccs -h node1 --stopall
node1 password:
Stopped node2.localdomain
Stopped node1.localdomain
[root@node1 ~]# ccs -h node1 --startall
Started node2.localdomain
Started node1.localdomain
[root@node1 ~]#
18、查看群集状态
[root@node1 ~]# clustat
Cluster Status for TestCluster2 @ Mon May 22 23:48:27 2017
Member Status: Quorate
Member Name ID Status
------ ---- ---- ------
node1.localdomain 1 Online, Local, rgmanager
node2.localdomain 2 Online, rgmanager
/dev/block/8:17 0 Online, Quorum disk
Service Name Owner (Last) State
------- ---- ----- ------ -----
service:TestServGrp node1.localdomain started
[root@node1 ~]#
19、查看群集节点状态
[root@node1 ~]# ccs_tool lsnode
Cluster name: icpl_cluster, config_version: 21
Nodename Votes Nodeid Fencetype
node1.localdomain 1 1 vcenter_fence
node2.localdomain 1 2 vcenter_fence
20、查看群集节点同步状态
[root@node1 ~]# ccs -h node1 --checkconf
All nodes in sync.
21、使用群集IP访问web服务
江健龙的技术博客http://jiangjianlong.blog.51cto.com/3735273/1931499
四、群集故障转移测试
[root@node1 ~]#poweroff
[root@node1 ~]#tail–f /var/log/messages
May 23 10:29:26 node1 modclusterd: shutdown succeeded
May 23 10:29:26 node1 rgmanager[2125]: Shutting down
May 23 10:29:26 node1 rgmanager[2125]: Shutting down
May 23 10:29:26 node1 rgmanager[2125]:Stopping service service:TestServGrp
May 23 10:29:27 node1 rgmanager[2125]: [ip] Removing IPv4 address 192.168.10.103/24 from eth0
May 23 10:29:36 node1rgmanager[2125]: Service service:TestServGrp is stopped
May 23 10:29:36 node1 rgmanager[2125]: disconnecting from CMAN
May 23 10:29:52 node1 rgmanager[2125]: Exiting
May 23 10:29:53 node1 ricci:shutdown succeeded
May 23 10:29:54 node1 oddjobd: oddjobd shutdown succeeded
May 23 10:29:54 node1 saslauthd[2315]:server_exit : master exited: 2315
[root@node2 ~]#tail–f /var/log/messages
May 23 10:29:45 node2 rgmanager[2130]: Member 1 shutting down
May 23 10:29:45 node2 rgmanager[2130]: Starting stopped service service:TestServGrp
May 23 10:29:45 node2 rgmanager[5688]: [ip] Adding IPv4 address 192.168.10.103/24 to eth0
May 23 10:29:49 node2 rgmanager[2130]: Service service:TestServGrp started
May 23 10:30:06 node2 qdiskd[1480]: Node 1 shutdown
May 23 10:30:06 node2 corosync[1437]: [QUORUM Members[1]: 2
May 23 10:30:06 node2 corosync[1437]: [TOTEM ] A processor joined or left the membership
and a new membership was formed.
May 23 10:30:06 node2 corosync[1437]: [CPG ] chosen downlist: sender r(0) ip (192.168.10.105) :
members(old:2 left:1)
May 23 10:30:06 node2 corosync[1437]: [MAIN ] Completed service synchronization, ready to
provide service
May 23 10:30:06 node2 kernel: dlm: closing connection to node 1
May 23 10:30:06 node2 qdiskd[1480]: Assuming master role
[root@node2 ~]# clustat
Cluster Status for TestCluster2 @ Mon May 22 23:48:27 2017
Member Status: Quorate
Member Name ID Status
------ ---- ---- ------
node1.localdomain 1 Online, Local, rgmanager
node2.localdomain 2 Online, rgmanager
/dev/block/8:17 0 Online, Quorum disk
Service Name Owner (Last) State
------- ---- ----- ------ -----
service:TestServGrp node2.localdomain started
[root@node2 ~]#
[root@node2 ~]# /etc/init.d/httpd stop
[root@node2 ~]#tail–f /var/log/messages
May 23 11:14:02 node2 rgmanager[11264]: [script] Executing /etc/init.d/httpd status
May 23 11:14:02 node2 rgmanager[11289]: [script] script:icpl: status of /etc/init.d/httpd Failed (returned 3)
May 23 11:14:02 node2 rgmanager[2127]: status on script "httpd" returned 1 (generic error)
May 23 11:14:02 node2 rgmanager[2127]: Stopping service service:TestServGrp
May 23 11:14:03 node2 rgmanager[11320]: [script] Executing /etc/init.d/httpd stop
May 23 11:14:03 node2 rgmanager[11384]: [ip] Removing IPv4 address 192.168.10.103/24 from eth0
May 23 11:14:08 node2 ricci[11416]: Executing '/usr/bin/virsh nodeinfo'
May 23 11:14:08 node2 ricci[11418]: Executing '/usr/libexec/ricci/ricci-worker -f /var/lib/ricci/queue/2116732044'
May 23 11:14:09 node2 ricci[11422]: Executing '/usr/libexec/ricci/ricci-worker -f /var/lib/ricci/queue/1193918332'
May 23 11:14:13 node2 rgmanager[2127]: Service service:TestServGrp is recovering
May 23 11:14:17 node2 rgmanager[2127]: Service service:TestServGrp is Now running on member 1
[root@node1 ~]#tail–f /var/log/messages
May 23 11:14:20 node1 rgmanager[2130]: Recovering Failed service service:TestServGrp
May 23 11:14:20 node1 rgmanager[13006]: [ip] Adding IPv4 address 192.168.10.103/24 to eth0
May 23 11:14:24 node1 rgmanager[13092]: [script] Executing /etc/init.d/httpd start
May 23 11:14:24 node1 rgmanager[2130]: Service service:TestServGrp started
May 23 11:14:58 node1 rgmanager[13280]: [script] Executing /etc/init.d/httpd status
[root@node1 ~]# clustat
Cluster Status for TestCluster2 @ Mon May 22 23:48:27 2017
Member Status: Quorate
Member Name ID Status
------ ---- ---- ------
node1.localdomain 1 Online, Local, rgmanager
node2.localdomain 2 Online, rgmanager
/dev/block/8:17 0 Online, Quorum disk
Service Name Owner (Last) State
------- ---- ----- ------ -----
service:TestServGrp node1.localdomain started
[root@node1 ~]#
[root@node1 ~]#service network stop
[root@node2 ~]#tail–f /var/log/messages
May 23 22:11:16 node2 qdiskd[1480]: Assuming master role
May 23 22:11:17 node2 qdiskd[1480]: Writing eviction notice for node 1
May 23 22:11:17 node2 corosync[1437]: [TOTEM ] A processor Failed, forming new configuration.
May 23 22:11:18 node2 qdiskd[1480]: Node 1 evicted
May 23 22:11:19 node2 corosync[1437]: [QUORUM] Members[1]: 2
May 23 22:11:19 node2 corosync[1437]: [TOTEM ] A processor joined or left the membership and a new membership was formed.
May 23 22:11:19 node2 corosync[1437]: [CPG ] chosen downlist: sender r(0) ip(192.168.10.105) ; members(old:2 left:1)
May 23 22:11:19 node2 corosync[1437]: [MAIN ] Completed service synchronization, ready to provide service.
May 23 22:11:19 node2 kernel: dlm: closing connection to node 1
May 23 22:11:19 node2 rgmanager[2131]: State change: node1.localdomain DOWN
May 23 22:11:19 node2 fenced[1652]: fencing node1.localdomain
May 23 22:11:58 node2 fenced[1652]: fence node1.localdomain success
May 23 22:11:59 node2 rgmanager[2131]: Taking over service service:TestServGrp from down member node1.localdomain
May 23 22:11:59 node2 rgmanager[6145]: [ip] Adding IPv4 address 192.168.10.103/24 to eth0
May 23 22:12:03 node2 rgmanager[6234]: [script] Executing /etc/init.d/httpd start
May 23 22:12:03 node2 rgmanager[2131]: Service service:TestServGrp started
May 23 22:12:35 node2 corosync[1437]: [TOTEM ] A processor joined or left the membership and a new membership was formed.
May 23 22:12:35 node2 corosync[1437]: [QUORUM] Members[2]: 1 2
May 23 22:12:35 node2 corosync[1437]: [QUORUM] Members[2]: 1 2
May 23 22:12:35 node2 corosync[1437]: [CPG ] chosen downlist: sender r(0) ip(192.168.10.105) ; members(old:1 left:0)
May 23 22:12:35 node2 corosync[1437]: [MAIN ] Completed service synchronization, ready to provide service.
May 23 22:12:41 node2 rgmanager[6425]: [script] Executing /etc/init.d/httpd status
May 23 22:12:43 node2 qdiskd[1480]: Node 1 shutdown
May 23 22:12:55 node2 kernel: dlm: got connection from 1
May 23 22:13:08 node2 rgmanager[2131]: State change: node1.localdomain UP
[root@node2 ~]# clustat
Cluster Status for TestCluster2 @ Mon May 22 23:48:27 2017
Member Status: Quorate
Member Name ID Status
------ ---- ---- ------
node1.localdomain 1 Online, Local, rgmanager
node2.localdomain 2 Online, rgmanager
/dev/block/8:17 0 Online, Quorum disk
Service Name Owner (Last) State
------- ---- ----- ------ -----
service:TestServGrp node2.localdomain started
[root@node2 ~]#
附：RHCS名词解释
1 分布式集群管理器（CMAN，Cluster Manager）
管理集群成员，了解成员之间的运行状态。
2 分布式锁管理器（DLM，distributed Lock Manager）
每一个节点都运行了一个后台进程DLM,当用记操作一个元数据时，会通知其它节点，只能读取这个元数据。
3 配置文件管理(CCS，Cluster Configuration System)
主要用于集群配置文件管理，用于配置文件的同步。每个节点运行了CSS后台进程。当发现配置文件（/etc/cluster/cluster.conf）变化后，马上将此变化传播到其它节点上去。
4.fence设备（fence）
工作原理：当主机异常，务机会调用fence设备，然后将异常主机重启，当fence设备操作成功后，返回信息给备机，备机接到fence设备的消息后，接管主机的服务和资源。
5、Conga集群管理软件：
Conga由两部分组成：luci和ricci，luci是跑在集群管理服务器上的服务，而ricci则是跑在各集群节点上的服务，luci也可以装在节点上。集群的管理和配置由这两个服务进行通信，可以使用Conga的web界面来管理RHCS集群。
6、高可用性服务管理（rgmanager）
提供节点服务监控和服务故障转移功能，当一个节点服务出现故障时，将服务转移到另一个健康节点。
版权声明：本文内容由互联网用户自发贡献，该文观点与技术仅代表作者本人。本站仅提供信息存储空间服务，不拥有所有权，不承担相关法律责任。如发现本站有涉嫌侵权/违法违规的内容， 请发送邮件至 dio@foxmail.com 举报，一经查实，本站将立刻删除。
