在python中运行其他代码时如何在后台运行循环

如何解决在python中运行其他代码时如何在后台运行循环

我有一个（有点）播放 2048 的 python 脚本。它的工作方式是按下左键，检测是否有变化，如果没有（也称为移动不起作用）它按下，如果这不起作用，它会按下，等等。如果有变化，它会继续下一步。

同时，我希望它不断检查用户是否按下 esc，如果按下，则结束程序。这样你就可以随时结束。

这是检查 esc 的代码：

while True:
    if keyboard.read_key() == "esc":
        endofgame = True
        break

这是执行移动的代码：

while not endofgame:
    endgameim = grab()
    pxcolour = endgameim.getpixel((818,453))
    print(pxcolour)
    if pxcolour == (123,110,101):
        endofgame = True
        print(endofgame)
        break
    while True:
        im = grab()
        pyautogui.press("left")
        im2 = grab()
        diff = ImageChops.difference(im2,im)
        bbox = diff.getbbox()
        print(bbox)
        if bbox is not None:
            continue
        else:
            pyautogui.press("up")
            im2 = grab()
            diff = ImageChops.difference(im2,im)
            bbox = diff.getbbox()
            if bbox is not None:
                continue
            else:
                pyautogui.press("down")
                im2 = grab()
                diff = ImageChops.difference(im2,im)
                bbox = diff.getbbox()
                if bbox is not None:
                    continue
                else:
                    pyautogui.press("right")
                    continue
                    break
            break
    break

顺便说一下，我知道我可以通过从网站上抓取代码来更简单地做到这一点，但我想挑战自己并且几乎完全通过图片来做到这一点。

解决方法

只需在 while 循环的开头添加您的条件，它将与其余代码一起循环。

while not endofgame:
    if keyboard.read_key() == "esc":
        endofgame = True
        break
    endgameim = grab()
    pxcolour = endgameim.getpixel((818,453))
    print(pxcolour)
    if pxcolour == (123,110,101):
        endofgame = True
        print(endofgame)
        break
    while True:
        im = grab()
        pyautogui.press("left")
        im2 = grab()
        diff = ImageChops.difference(im2,im)
        bbox = diff.getbbox()
        print(bbox)
        if bbox is not None:
            continue
        else:
            pyautogui.press("up")
            im2 = grab()
            diff = ImageChops.difference(im2,im)
            bbox = diff.getbbox()
            if bbox is not None:
                continue
            else:
                pyautogui.press("down")
                im2 = grab()
                diff = ImageChops.difference(im2,im)
                bbox = diff.getbbox()
                if bbox is not None:
                    continue
                else:
                    pyautogui.press("right")
                    continue
                    break
            break
    break