如何解决broker.xml无法接收更改
我遵循了this tutorial,但是我已经在一个Spring Boot应用程序中使消费者成为了消费者,而在另一个Spring Boot应用程序中使了消费者成为了生产者。当生产者将消息发送到队列时,消费者成功接收到消息。
我的队列名称是youtube
。
我要执行的操作是将max-size-bytes
设置为1
,因此,消费者在收听youtube
队列时基本上不会收到任何消息。这就是我的broker.xml
中的内容:
<address-setting match="youtube">
<max-size-bytes>10</max-size-bytes>
<page-size-bytes>1</page-size-bytes>
<address-full-policy>DROP</address-full-policy>
</address-setting>
我可以在artemis.log
中看到所做的更改,但是尽管消息超过10个字节,但使用者仍在使用消息。如何正确配置呢?
我的broker.xml:
<?xml version='1.0'?>
<!--
Licensed to the Apache Software Foundation (ASF) under one
or more contributor license agreements. See the NOTICE file
distributed with this work for additional information
regarding copyright ownership. The ASF licenses this file
to you under the Apache License,Version 2.0 (the
"License"); you may not use this file except in compliance
with the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing,software distributed under the License is distributed on an
"AS IS" BASIS,WITHOUT WARRANTIES OR CONDITIONS OF ANY
KIND,either express or implied. See the License for the
specific language governing permissions and limitations
under the License.
-->
<configuration xmlns="urn:activemq"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:xi="http://www.w3.org/2001/XInclude"
xsi:schemaLocation="urn:activemq /schema/artemis-configuration.xsd">
<core xmlns="urn:activemq:core" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="urn:activemq:core ">
<name>0.0.0.0</name>
<persistence-enabled>true</persistence-enabled>
<!-- this could be ASYNCIO,MAPPED,NIO
ASYNCIO: Linux Libaio
MAPPED: mmap files
NIO: Plain Java Files
-->
<journal-type>NIO</journal-type>
<paging-directory>data/paging</paging-directory>
<bindings-directory>data/bindings</bindings-directory>
<journal-directory>data/journal</journal-directory>
<large-messages-directory>data/large-messages</large-messages-directory>
<journal-datasync>true</journal-datasync>
<journal-min-files>2</journal-min-files>
<journal-pool-files>10</journal-pool-files>
<journal-device-block-size>4096</journal-device-block-size>
<journal-file-size>10M</journal-file-size>
<!--
This value was determined through a calculation.
Your system could perform 0.14 writes per millisecond
on the current journal configuration.
That translates as a sync write every 7100000 nanoseconds.
Note: If you specify 0 the system will perform writes directly to the disk.
We recommend this to be 0 if you are using journalType=MAPPED and journal-datasync=false.
-->
<journal-buffer-timeout>7100000</journal-buffer-timeout>
<!--
When using ASYNCIO,this will determine the writing queue depth for libaio.
-->
<journal-max-io>1</journal-max-io>
<!--
You can verify the network health of a particular NIC by specifying the <network-check-NIC> element.
<network-check-NIC>theNicName</network-check-NIC>
-->
<!--
Use this to use an HTTP server to validate the network
<network-check-URL-list>http://www.apache.org</network-check-URL-list> -->
<!-- <network-check-period>10000</network-check-period> -->
<!-- <network-check-timeout>1000</network-check-timeout> -->
<!-- this is a comma separated list,no spaces,just DNS or IPs
it should accept IPV6
Warning: Make sure you understand your network topology as this is meant to validate if your network is valid.
Using IPs that could eventually disappear or be partially visible may defeat the purpose.
You can use a list of multiple IPs,and if any successful ping will make the server OK to continue running -->
<!-- <network-check-list>10.0.0.1</network-check-list> -->
<!-- use this to customize the ping used for ipv4 addresses -->
<!-- <network-check-ping-command>ping -c 1 -t %d %s</network-check-ping-command> -->
<!-- use this to customize the ping used for ipv6 addresses -->
<!-- <network-check-ping6-command>ping6 -c 1 %2$s</network-check-ping6-command> -->
<!-- how often we are looking for how many bytes are being used on the disk in ms -->
<disk-scan-period>5000</disk-scan-period>
<!-- once the disk hits this limit the system will block,or close the connection in certain protocols
that won't support flow control. -->
<max-disk-usage>90</max-disk-usage>
<!-- should the broker detect dead locks and other issues -->
<critical-analyzer>true</critical-analyzer>
<critical-analyzer-timeout>120000</critical-analyzer-timeout>
<critical-analyzer-check-period>60000</critical-analyzer-check-period>
<critical-analyzer-policy>HALT</critical-analyzer-policy>
<page-sync-timeout>7100000</page-sync-timeout>
<!-- the system will enter into page mode once you hit this limit.
This is an estimate in bytes of how much the messages are using in memory
The system will use half of the available memory (-Xmx) by default for the global-max-size.
You may specify a different value here if you need to customize it to your needs.
<global-max-size>100Mb</global-max-size>
-->
<acceptors>
<!-- useEpoll means: it will use Netty epoll if you are on a system (Linux) that supports it -->
<!-- amqpCredits: The number of credits sent to AMQP producers -->
<!-- amqpLowCredits: The server will send the # credits specified at amqpCredits at this low mark -->
<!-- amqpDuplicateDetection: If you are not using duplicate detection,set this to false
as duplicate detection requires applicationProperties to be parsed on the server. -->
<!-- amqpMinLargeMessageSize: Determines how many bytes are considered large,so we start using files to hold their data.
default: 102400,-1 would mean to disable large mesasge control -->
<!-- Note: If an acceptor needs to be compatible with HornetQ and/or Artemis 1.x clients add
"anycastPrefix=jms.queue.;multicastPrefix=jms.topic." to the acceptor url.
See https://issues.apache.org/jira/browse/ARTEMIS-1644 for more information. -->
<!-- Acceptor for every supported protocol -->
<acceptor name="artemis">tcp://0.0.0.0:61616?tcpSendBufferSize=1048576;tcpReceiveBufferSize=1048576;amqpMinLargeMessageSize=102400;protocols=CORE,AMQP,STOMP,HORNETQ,MQTT,OPENWIRE;useEpoll=true;amqpCredits=1000;amqpLowCredits=300;amqpDuplicateDetection=true</acceptor>
<!-- AMQP Acceptor. Listens on default AMQP port for AMQP traffic.-->
<acceptor name="amqp">tcp://0.0.0.0:5672?tcpSendBufferSize=1048576;tcpReceiveBufferSize=1048576;protocols=AMQP;useEpoll=true;amqpCredits=1000;amqpLowCredits=300;amqpMinLargeMessageSize=102400;amqpDuplicateDetection=true</acceptor>
<!-- STOMP Acceptor. -->
<acceptor name="stomp">tcp://0.0.0.0:61613?tcpSendBufferSize=1048576;tcpReceiveBufferSize=1048576;protocols=STOMP;useEpoll=true</acceptor>
<!-- HornetQ Compatibility Acceptor. Enables HornetQ Core and STOMP for legacy HornetQ clients. -->
<acceptor name="hornetq">tcp://0.0.0.0:5445?anycastPrefix=jms.queue.;multicastPrefix=jms.topic.;protocols=HORNETQ,STOMP;useEpoll=true</acceptor>
<!-- MQTT Acceptor -->
<acceptor name="mqtt">tcp://0.0.0.0:1883?tcpSendBufferSize=1048576;tcpReceiveBufferSize=1048576;protocols=MQTT;useEpoll=true</acceptor>
</acceptors>
<security-settings>
<security-setting match="#">
<permission type="createNonDurableQueue" roles="amq"/>
<permission type="deleteNonDurableQueue" roles="amq"/>
<permission type="createDurableQueue" roles="amq"/>
<permission type="deleteDurableQueue" roles="amq"/>
<permission type="createAddress" roles="amq"/>
<permission type="deleteAddress" roles="amq"/>
<permission type="consume" roles="amq"/>
<permission type="browse" roles="amq"/>
<permission type="send" roles="amq"/>
<!-- we need this otherwise ./artemis data imp wouldn't work -->
<permission type="manage" roles="amq"/>
</security-setting>
</security-settings>
<address-settings>
<address-setting match="youtube">
<max-size-bytes>10</max-size-bytes>
<page-size-bytes>1</page-size-bytes>
<address-full-policy>DROP</address-full-policy>
</address-setting>
<!-- if you define auto-create on certain queues,management has to be auto-create -->
<address-setting match="activemq.management#">
<dead-letter-address>DLQ</dead-letter-address>
<expiry-address>ExpiryQueue</expiry-address>
<redelivery-delay>0</redelivery-delay>
<!-- with -1 only the global-max-size is in use for limiting -->
<max-size-bytes>-1</max-size-bytes>
<message-counter-history-day-limit>10</message-counter-history-day-limit>
<address-full-policy>PAGE</address-full-policy>
<auto-create-queues>true</auto-create-queues>
<auto-create-addresses>true</auto-create-addresses>
<auto-create-jms-queues>true</auto-create-jms-queues>
<auto-create-jms-topics>true</auto-create-jms-topics>
</address-setting>
<!--default for catch all-->
<address-setting match="#">
<dead-letter-address>DLQ</dead-letter-address>
<expiry-address>ExpiryQueue</expiry-address>
<redelivery-delay>0</redelivery-delay>
<!-- with -1 only the global-max-size is in use for limiting -->
<max-size-bytes>-1</max-size-bytes>
<message-counter-history-day-limit>10</message-counter-history-day-limit>
<address-full-policy>PAGE</address-full-policy>
<auto-create-queues>true</auto-create-queues>
<auto-create-addresses>true</auto-create-addresses>
<auto-create-jms-queues>true</auto-create-jms-queues>
<auto-create-jms-topics>true</auto-create-jms-topics>
</address-setting>
</address-settings>
<addresses>
<address name="DLQ">
<anycast>
<queue name="DLQ" />
</anycast>
</address>
<address name="ExpiryQueue">
<anycast>
<queue name="ExpiryQueue" />
</anycast>
</address>
</addresses>
<!-- Uncomment the following if you want to use the Standard LoggingActiveMQServerPlugin pluging to log in events
<broker-plugins>
<broker-plugin class-name="org.apache.activemq.artemis.core.server.plugin.impl.LoggingActiveMQServerPlugin">
<property key="LOG_ALL_EVENTS" value="true"/>
<property key="LOG_CONNECTION_EVENTS" value="true"/>
<property key="LOG_SESSION_EVENTS" value="true"/>
<property key="LOG_CONSUMER_EVENTS" value="true"/>
<property key="LOG_DELIVERING_EVENTS" value="true"/>
<property key="LOG_SENDING_EVENTS" value="true"/>
<property key="LOG_INTERNAL_EVENTS" value="true"/>
</broker-plugin>
</broker-plugins>
-->
</core>
</configuration>
版权声明:本文内容由互联网用户自发贡献,该文观点与技术仅代表作者本人。本站仅提供信息存储空间服务,不拥有所有权,不承担相关法律责任。如发现本站有涉嫌侵权/违法违规的内容, 请发送邮件至 dio@foxmail.com 举报,一经查实,本站将立刻删除。