要求聚合的端口工作在全双工,速度一致,在同一槽口且连续。
参数:ingress:源MAC,both:源和目的MAC
对于SwitchA:
[Quidway]sysname SwitchA
[SwitchA]interface ethernet0/1
[SwitchA-Ethernet0/1]duplex full
[SwitchA-Ethernet0/1]speed 100
[SwitchA-Ethernet0/1]port link-type trunk
[SwitchA-Ethernet0/1]port trunk permit vlan all
[SwitchA-Ethernet0/1]int e0/2
[SwitchA-Ethernet0/2]duplex full
[SwitchA-Ethernet0/2]speed 100
[SwitchA-Ethernet0/2]port link-type trunk
[SwitchA-Ethernet0/2]port trunk permit vlan all
对于SwitchB:
[Quidway]sysname SwitchB
[SwitchB]interface ethernet0/1
[SwitchB-Ethernet0/1]duplex full
[SwitchB-Ethernet0/1]speed 100
[SwitchB-Ethernet0/1]port link-type trunk
[SwitchB-Ethernet0/1]port trunk permit vlan all
[SwitchB-Ethernet0/1]int e0/2
[SwitchB-Ethernet0/2]duplex full
[SwitchB-Ethernet0/2]speed 100
[SwitchB-Ethernet0/2]port link-type trunk
[SwitchB-Ethernet0/2]port trunk permit vlan all
聚合操作:
[SwitchA]link-aggregation ethernet0/1 to ethernet0/2 both
[SwitchB]link-aggregation ethernet0/1 to ethernet0/2 both
[SwitchA]display link-aggregation ethernet0/1 [SwitchA]undo link-aggregation all
版权声明:本文内容由互联网用户自发贡献,该文观点与技术仅代表作者本人。本站仅提供信息存储空间服务,不拥有所有权,不承担相关法律责任。如发现本站有涉嫌侵权/违法违规的内容, 请发送邮件至 dio@foxmail.com 举报,一经查实,本站将立刻删除。