转自：https://thomasmodeneis.wordpress.com/2017/05/12/how-to-restore-ubuntu-16-04-kernel-panic-not-syncing-vfs-unable-to-mount-root-fs-on-unknown-block00/
How to restore Ubuntu 16.04 “Kernel panic – not syncing: VFS: Unable to mount root fs on unknown-block(0,0)”
Today one of the guys on my development teamran into an old problem on Linux,the good and old Kernel panic … This time it was after updating Ubuntu 16.04 internals.After doing the reboot,there it was,the old good linux scaring n00bies away:
Kernel panic – not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
This is an old problem and usually,depending on the tooling you have around it,it can be quite time-consuming to figure a way out if you are not experienced on Linux.
The problem originated because he installed updates on Ubuntu,one after another during many months of usage,until a day … nothing special,he updated once again and boom!!! The updates caused the/bootpartition to be left with no space,and this caused the grub to be blocked when trying tomount the root fs.The solution is simple: just toremove the old kernel images and run a quick cleanup.
I believe if a piece of software or program is not clear enough for an average person to understand and solve,than its broken and it should be properly fixed or at least documented until it can be fixed permanently.
[SOLVED] kernel panic-not syncing:
Start your Ubuntu with shift pressed until you see the recover screen,choose recovery mode:
Cleaning upBoot partition on Ubuntu 16.04
When on Rescue Mode,select the optioncleanfollowed bydpkg,grubandfsck.
This will make sure that the space on your boot partition is free,will repair any broken packages,check all file systems and that they are correct and update your grub bootloader.
After this,you are very likely to get a stable Ubuntu 16.04 back.
The command line way to clean up /boot partition:
It can be that you open your computer,and it will boot normally,but Ubuntu will complain that the boot partition is almost full,in this case you can execute the auto-remove:
$ sudo apt-get autoremove --purge [sudo] password for ninja: Reading package lists... Done Building dependency tree Reading state information... Done The following packages will be REMOVED: linux-headers-4.4.0-79 linux-headers-4.4.0-79-generic linux-headers-4.4.0-81 linux-headers-4.4.0-81-generic linux-headers-4.8.0-49 linux-headers-4.8.0-49-generic linux-headers-4.8.0-51 linux-headers-4.8.0-51-generic linux-headers-4.8.0-52 linux-headers-4.8.0-52-generic linux-headers-4.8.0-54 linux-headers-4.8.0-54-generic linux-image-4.4.0-79-generic linux-image-4.4.0-81-generic linux-image-4.8.0-49-generic linux-image-4.8.0-51-generic linux-image-4.8.0-52-generic linux-image-4.8.0-54-generic linux-image-extra-4.4.0-79-generic linux-image-extra-4.4.0-81-generic linux-image-extra-4.8.0-49-generic linux-image-extra-4.8.0-51-generic linux-image-extra-4.8.0-52-generic linux-image-extra-4.8.0-54-generic 0 upgraded,0 newly installed,24 to remove and 93 not upgraded. 9 not fully installed or removed. After this operation,1854 MB disk space will be freed. Do you want to continue? [Y/n] y (Reading database ... 497711 files and directories currently installed.) Removing linux-headers-4.4.0-79-generic (4.4.0-79.100) ... Removing linux-headers-4.4.0-79 (4.4.0-79.100) ... Removing linux-headers-4.4.0-81-generic (4.4.0-81.104) ... Removing linux-headers-4.4.0-81 (4.4.0-81.104) ... Removing linux-headers-4.8.0-49-generic (4.8.0-49.52~16.04.1) ... Removing linux-headers-4.8.0-49 (4.8.0-49.52~16.04.1) ... Removing linux-headers-4.8.0-51-generic (4.8.0-51.54~16.04.1) ... Removing linux-headers-4.8.0-51 (4.8.0-51.54~16.04.1) ... Removing linux-headers-4.8.0-52-generic (4.8.0-52.55~16.04.1) ... Removing linux-headers-4.8.0-52 (4.8.0-52.55~16.04.1) ... Removing linux-headers-4.8.0-54-generic (4.8.0-54.57~16.04.1) ... Removing linux-headers-4.8.0-54 (4.8.0-54.57~16.04.1) ... Removing linux-image-extra-4.4.0-79-generic (4.4.0-79.100) ... (...) Warning: Setting GRUB_TIMEOUT to a non-zero value when GRUB_HIDDEN_TIMEOUT is set is no longer supported. Found linux image: /boot/vmlinuz-4.8.0-58-generic Found initrd image: /boot/initrd.img-4.8.0-58-generic Found linux image: /boot/vmlinuz-4.8.0-56-generic Found initrd image: /boot/initrd.img-4.8.0-56-generic Found linux image: /boot/vmlinuz-4.4.0-83-generic Found initrd image: /boot/initrd.img-4.4.0-83-generic Found memtest86+ image: /memtest86+.elf Found memtest86+ image: /memtest86+.bin done Setting up linux-image-generic-hwe-16.04 (4.8.0.58.29) ... Setting up linux-generic-hwe-16.04 (4.8.0.58.29) ... Setting up linux-image-extra-virtual (4.4.0.83.89) ... ninja@ninja:~$ sudo apt-get autoremove --purge Reading package lists... Done Building dependency tree Reading state information... Done 0 upgraded,0 to remove and 93 not upgraded.
Then finally you can update GRUB kernel list:
$ sudo update-grub Generating grub configuration file ... Warning: Setting GRUB_TIMEOUT to a non-zero value when GRUB_HIDDEN_TIMEOUT is set is no longer supported. Found linux image: /boot/vmlinuz-4.8.0-58-generic Found initrd image: /boot/initrd.img-4.8.0-58-generic Found linux image: /boot/vmlinuz-4.8.0-56-generic Found initrd image: /boot/initrd.img-4.8.0-56-generic Found linux image: /boot/vmlinuz-4.4.0-83-generic Found initrd image: /boot/initrd.img-4.4.0-83-generic Found memtest86+ image: /memtest86+.elf Found memtest86+ image: /memtest86+.bin done
Check the partition sizes with ncdu:
If you dont have it,then install with:
$ sudo apt-get install ncdu
Alternatively you can:
check the partition sizes with lsblk:
$ lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT loop1 7:1 0 88,1M 1 loop /snap/conjure-up/518 loop4 7:4 0 79,5M 1 loop /snap/core/2312 loop2 7:2 0 88,1M 1 loop /snap/conjure-up/527 loop0 7:0 0 79,5M 0 loop /snap/core/1689 nvme0n1 259:0 0 477G 0 disk ├─nvme0n1p5 259:3 0 476,5G 0 part │ └─nvme0n1p5_crypt 253:0 0 476,5G 0 crypt │ ├─ubuntu--vg-root 253:1 0 460,9G 0 lvm / │ └─ubuntu--vg-swap_1 253:2 0 15,6G 0 lvm │ └─cryptswap1 253:3 0 15,6G 0 crypt [SWAP] ├─nvme0n1p1 259:1 0 487M 0 part /boot └─nvme0n1p2 259:2 0 1K 0 part loop5 7:5 0 78,4M 0 loop /snap/core/1577 loop3 7:3 0 88,2M 1 loop /snap/conjure-up/510
Or you can also:
Check the partition sizes with baobab:
$ sudo baobab
Now just restart the Ubuntu and it should be as good as before!
Happy Open Source coding to everyone.
版权声明：本文内容由互联网用户自发贡献，该文观点与技术仅代表作者本人。本站仅提供信息存储空间服务，不拥有所有权，不承担相关法律责任。如发现本站有涉嫌侵权/违法违规的内容， 请发送邮件至 dio@foxmail.com 举报，一经查实，本站将立刻删除。
