【Hadoop】linux安装mysql

官网下载地址

​ https://dev.MysqL.com/downloads/file/?id=471503

​ 本文所用MysqL版本为5.7.19;

上传包

​ 将MysqL-5.7.19-1.el7.x86_64.rpm-bundle.tar 安装包上传到/opt/soft目录（此目录可以自定义）,采用rz命令；

[root@bigdata112 conf]# rz

​ 若不存在rz命令，可以用yum进行安装（如下代码），安装完成再执行rz 上传包命令；

[root@bigdata112 ~]# yum install lrzsz

检测是否已有MysqL

[root@bigdata112 ~]# rpm -qa | grep MysqL

检测是否已有Mariadb

[root@bigdata112 MysqL-5.7.19]# rpm -qa | grep mariadb
mariadb-libs-5.5.44-2.el7.centos.x86_64

​ 若存在则卸载；

[root@bigdata112 MysqL-5.7.19]# rpm -e --nodeps mariadb-libs-5.5.44-2.el7.centos.x86_64

解压包

​ 将MysqL压缩包解压到/op/module/MysqL-5.7.19目录，若没有则新建一个目录；

​ 因为我们下载的是.tar压缩包，所以命令为：tar -vxf

[root@bigdata112 ~]# tar -vxf /opt/soft/MysqL-5.7.19-1.el7.x86_64.rpm-bundle.tar -C /opt/module/MysqL-5.7.19/

安装MysqL

​ 切换到/opt/module/MysqL-5.7.19/目录，依次执行以下命令：

​ 安装server

[root@bigdata112 MysqL-5.7.19]# rpm -ivh --nodeps MysqL-community-server-5.7.19-1.el7.x86_64.rpm

​ 安装client

[root@bigdata112 MysqL-5.7.19]# rpm -ivh --nodeps MysqL-community-client-5.7.19-1.el7.x86_64.rpm

​ 安装common

[root@bigdata112 MysqL-5.7.19]# rpm -ivh MysqL-community-common-5.7.19-1.el7.x86_64.rpm

​ 安装libs

[root@bigdata112 MysqL-5.7.19]# rpm -ivh MysqL-community-libs-5.7.19-1.el7.x86_64.rpm

​ 安装libs-compat

[root@bigdata112 MysqL-5.7.19]# rpm -ivh MysqL-community-libs-compat-5.7.19-1.el7.x86_64.rpm

启动MysqL服务

[root@bigdata112 MysqL-5.7.19]# systemctl start MysqLd

查看MysqL服务状态

[root@bigdata112 MysqL-5.7.19]# systemctl status MysqLd
● MysqLd.service - MysqL Server
   Loaded: loaded (/usr/lib/systemd/system/MysqLd.service; enabled; vendor preset: disabled)
   Active: active (running) since 日 2019-09-08 21:36:35 CST; 1h 34min ago
     Docs: man:MysqLd(8)
           http://dev.MysqL.com/doc/refman/en/using-systemd.html
  Process: 3474 ExecStart=/usr/sbin/MysqLd --daemonize --pid-file=/var/run/MysqLd/MysqLd.pid $MysqLD_OPTS (code=exited, status=0/SUCCESS)
  Process: 3401 ExecStartPre=/usr/bin/MysqLd_pre_systemd (code=exited, status=0/SUCCESS)
 Main PID: 3478 (MysqLd)
   CGroup: /system.slice/MysqLd.service
           └─3478 /usr/sbin/MysqLd --daemonize --pid-file=/var/run/MysqLd/MysqLd.pid

9月 08 21:36:32 bigdata112 systemd[1]: Starting MysqL Server...
9月 08 21:36:35 bigdata112 systemd[1]: Started MysqL Server.

查看默认生成的root密码

[root@bigdata112 MysqL-5.7.19]# cat /var/log/MysqLd.log | grep password
2019-09-08T15:15:25.399553Z 1 [Note] A temporary password is generated for root@localhost: m5D_fhi6%y61

登录MysqL

[root@bigdata112 MysqL-5.7.19]# MysqL -uroot -p'm5D_fhi6%y61'

修改MysqL密码规则

1. 密码强度检查等级，0/LOW、1/MEDIUM、2/STRONG

   MysqL> set global validate_password_policy=0;

2. 密码至少要包含的小写字母个数和大写字母个数

   MysqL> set global validate_password_mixed_case_count=0;

3. 密码至少要包含的数字个数

   MysqL> set global validate_password_number_count=3;

4. 密码至少要包含的特殊字符数

   MysqL> set global validate_password_special_char_count=0;

5. 密码最小长度，参数默认为8

   MysqL> set global validate_password_length=3;

修改密码

MysqL> alter user root@localhost identified by 'root1234';
MysqL> flush privileges;

测试MysqL

​ 显示数据库列表

MysqL> show databases;
+--------------------+
| Database           |
+--------------------+
| @R_875_4045@ion_schema |
| MysqL              |
| performance_schema |
| sys                |
+--------------------+
4 rows in set (0.00 sec)

​ 显示刚才设置的密码规则

MysqL> SHOW VARIABLES LIKE 'validate_password%';
+--------------------------------------+-------+
| Variable_name                        | Value |
+--------------------------------------+-------+
| validate_password_check_user_name    | OFF   |
| validate_password_dictionary_file    |       |
| validate_password_length             | 3     |
| validate_password_mixed_case_count   | 0     |
| validate_password_number_count       | 3     |
| validate_password_policy             | LOW   |
| validate_password_special_char_count | 0     |
+--------------------------------------+-------+
7 rows in set (0.00 sec)

修改远程登录权限

​ 查询user表内用户的登录权限

MysqL> select host,user from MysqL.user;
+-----------+---------------+
| host      | user          |
+-----------+---------------+
| localhost | MysqL.session |
| localhost | MysqL.sys     |
| localhost | root          |
+-----------+---------------+
3 rows in set (0.00 sec)

​ 修改root登录权限为所有%

MysqL> update MysqL.user set host = '%' where user = 'root';
Query OK, 1 row affected (0.00 sec)
Rows matched: 1  Changed: 1  Warnings: 0

​ 刷新缓存

MysqL> flush privileges;

测试远程登录权限

​ 利用navicat客户端建立连接，测试是否成功；